• Announcements

    • Beth n Rod

      The Grime Scene Terms Of Service and Forum Rules   08/23/2007

      Terms of Service Warning: The contracting trades are an activity in which there exists the potential for serious injury or death. ALL Users must read and agree to these Terms of Service before using this site. This web site is dedicated to the contracting trades, an activity which is inherently dangerous. You should not depend on information gleaned from this site for your personal safety. Your safety depends upon your own judgment based on competent instruction, experience, and a realistic assessment of ability. There are no warranties, either expressed or implied, that the information on this website are accurate and reliable. Your use of this site indicates your assumption of the risk of death or serious injury and is an acknowledgment of your own sole responsibility for your safety. The following terms and conditions are in reference to the The Grime Scene web site and discussion board (www.thegrimescene.com), here in referred to as "The Grime Scene". These terms and conditions apply to all sites, services, and resources within the The Grime Scene. ACCEPTANCE OF TERMS The Grime Scene provides its service to you, subject to the following Terms of Service (referred to as "TOS"), which may be updated by us from time to time without notice. You may review the most current version of the TOS at any time in the Announcements. In addition, when using particular The Grime Scene services, you shall be subject to any posted guidelines or rules applicable to such services.
      [*]DESCRIPTION OF SERVICE The Grime Scene provides users with access to informational resources including communication and interactive resources pertaining to the contracting industry. Under no circumstances shall The Grime Scene be liable to any user on account of that user's use or misuse of the site or reliance on the site. Such limitation of liability shall apply to prevent recovery of direct, indirect, incidental, consequential, special, punitive and exemplary damages (even if The Grime Scene has been advised of the possibility of such damages). Such limitation of liability shall apply whether the damages arise from use or misuse of the site or reliance on the site, from inability to use the site, or from the interruption, suspension, or termination of the site or services offered on the site (including such damages incurred by third parties).
      Such limitation shall also apply with respect to damages incurred by reason of other services or goods received through or advertised on the site or received through any links provided on the site. .Such limitation shall apply, without limitation, to the costs of procurement of substitute goods or services, lost profits, or lost data. These limitations shall apply notwithstanding any failure of essential purpose of any limited remedy. The Grime Scene makes no warranties as to the accuracy of its information and due to the volatile nature of the information contained within The Grime Scene. The Grime Scene can not screen or authenticate all articles, posts, listings or other information.
      [*]TERMS OF MEMBERSHIP & USAGE RESTRICTIONS Site Membership Membership is available to any person over the age of 13 who registers and accurately provides all the required information, provides a legitimate electronic mail address and obtains a unique The Grime Scene member name and password. Membership is non-transferable. The use of web-based email accounts may be denied due to abuse.
      All membership information must be accurate and belong to the person registering. Invalid, incomplete, or falsified information can result in the immediate termination of all membership privileges for that user and, possibly a permanent ban, restricting the member from using any of The Grime Scene’s services at any time.
      Usage of this site is restricted to persons under the age of 13. (you must be over 13 to participate here)
      The Grime Scene is not responsible for the content of any member's posts, and the views expressed on The Grime Scene are the responsibility of the posting member and not The Grime Scene. The Grime Scene does not preview member posts in any way before they appear on the site. Any link posted to a third-party internet address does not imply an endorsement of that site or its content by The Grime Scene.
      The Grime Scene forums are for the discussion of the contracting trades and related topics. While the administrators and moderators of The Grime Scene will attempt to keep all off-topic messages off this forum, it is impossible for us to review all messages. All messages express the views of the author, and neither the owners of The Grime Scene Room nor the moderators will be held responsible for the content of any message.
      The Grime Scene forums may contain profanity.
      As a condition of buying and selling items listed in any forum of The Grime Scene, Buyer and Seller agree that The Grime Scene is not brokering or otherwise participating in any purchase or sale. The Grime Scene has no knowledge of the terms of sale, the condition of any items offered for sale, the accuracy of any aspect of the sale or the use to which any item shall be put. Buyer assumes all responsibility for proper use of any item so purchased. Buyer acknowledges that improper use of some or all of the items offered for sale on The Grime Scene may cause serious injury or death. Buyer shall seek qualified assistance and instruction in the use of all items purchased.
      Pornography of any type is not allowed.
      The owners, administrators, and moderators of The Grime Scene reserve both the right to remove, edit, move or close any thread for any reason, and the right to suspend or delete any user account for any reason we feel is in violation of the TOS, both explicit and implied.
      Membership in The Grime Scene is a privilege, not a right. We reserve the right to deny service to any person at any time without cause.
      [*]INTELLECTUAL PROPERTY It is the policy of The Grime Scene to respond expeditiously to claims of intellectual property infringement. The Grime Scene will promptly process and investigate notices of alleged infringement and will take appropriate actions under the Digital Millennium Copyright Act ("DMCA"). Should a violation of intellectual property be discovered, the document(s) or messages in such violation will be removed in a timely manner after any and all investigating has been completed to prove the authenticity of such a claim.
      [*]PUBLIC CONTENT ON THE GRIME SCENE Any and all content posted for inclusion in publicly accessible areas of The Grime Scene are the responsibility of the creator. The Grime Scene makes no claims or warranties about such information or its authenticity. Upon posting any content on The Grime Scene, you grant The Grime Scene the non-exclusive right to publish, modify and use such content solely for the purpose of displaying such content.
      [*]LIMITATION OF RE-USE You agree not to reproduce, duplicate, copy, sell, resell or exploit for any commercial purposes or noncommercial purposes any portion of the services or content contained within The Grime Scene and its subsidiary sites. In order to use any content, graphical art, photos or files owned by or published by The Grime Scene, direct, written authorization must be obtained from The Grime Scene with no exceptions at any time for any reason.
      [*]LEGAL RESTRICTIONS This agreement shall be constructed and controlled by the laws of the State of Maryland, without regard to its conflict of law provisions. Any dispute arising hereunder will be governed by the laws of the State of Maryland. Each member agrees to personal jurisdiction by tile state and federal courts of the State of Maryland.
      The Grime Scene reserves the right to change, modify or update this TOS agreement at any time without notification. Membership in and the use of resources contained within The Grime Scene constitutes full agreement and acknowledgment of the restrictions, limitations and terms set forth in this agreement.
      [*]Forum Posting Rules The following is a list of basic guidelines about what is and is not allowed while posting on The Grime Scene. These rules are in addition to what is listed in our Terms Of Service . Please read through all of these sections before using our site and contact us if you have questions. Users shall treat each other with respect at all times on The Grime Scene. Name calling, personal attacks, or other inappropriate behavior will not be allowed and may cause your account to be banned.
      Advertising on our site is specific to Contractors and to those Manufacturers and Distributors serving our industry. All Manufacturers and Distributors must have a signature, and should not solicit in the main forums. Please use the vendor area. Members who try to sell products and/or services to contracting professionals in the main forum area may have their accounts privileges suspended or revoked.
      No pornographic material or links to pornographic material may be posted on this site.
      Profanity shall be kept to a minimum. Words that appear to be blanked out with stars (*) are not allowed.
      You may only post material and content that you own. Posting copyrighted material, trademarks, and other violations of the DMCA is prohibited. Anyone posting an article must credit the author and provide a link to the original data.
      These rules may be altered at anytime without notice so please check the Announcements often.

rj242

Members
  • Content count

    143
  • Joined

  • Last visited

  • Days Won

    10

rj242 last won the day on June 18

rj242 had the most liked content!

About rj242

  • Rank
    TGS Bronze Member
  • Birthday 08/04/1963

Contact Methods

  • Website URL
    http://www.randyjonespressurewashing.com

Profile Information

  • Company Name
    rj's pressure washing
  • First & Last Name
    Randall
  • City & State
    Shiloh, NC
  • Occupation
    Part-time PW
  1. If you are constantly going through chemical injectors, check the psi of your pump. When mine was going through several a week, I found that my pressure had be increased from 3000 to 5000. Adjusted the pump back to 3000 psi and everything started working correctly. I think one of my helper twisted the unloaded.
  2. We shut down in November, and start back in March. Work on equipment during the cold days,
  3. Cleaner, These three pieces, I don't think go in the soap tube portion of the injector. I think they go into your pressure washing hose side of the injector. Each piece has a different size hole in it. Is the largest one for 8gpm machines?
  4. Yes the ceramic ball and spring are in it. I believe these screw type pieces change out the 3/8 end of injector.
  5. ckeener, I just bought a super suds sucker. It didn't come with any instructions, and three loose parts (screw with hole in middle). Do u know which part for a 8gpm?
  6. I have been having a lot of chemical injector problems lately. I have an 8gpm/3000psi machine and don't seem to be able to keep a GP high draw injector going more that a couple of days. I rinse it out after every job. When they are only a couple of days old the ball isn't pitted. But it is usually pitted after a couple of weeks. What injectors would you consider the "BEST"? Also what size injector should I get? I am using the 2.1 and running 200' of hose. When I first got my machine, I may have used 3-4 injectors all year, lately I am doing good if one will last a week. Very frustrating!!!! Anybody have any experience with the chemical remote control unit (kinda pricey)? Thanks in advance for your replies!!!
  7. Thanks for all the replies. Guy, I just noticed that you are in NC. When I get some time, I will call you. I am possibly going to be in Salemburg in July, and if I do, I would love to see your rig. Right now I am running a two portable machines (5.5/100 gal buffer and a 4gpm), on my 10X6 trailer. I have a portable hotbox, but can't carry the 4gpm machine when I bring the hotbox.
  8. I am thinking about buying a new trailer mounted rig. I would like to have a two gun system, and hot water. I do mostly residential work, but do have a few commercial concrete contracts. I would like any suggestions on buying a new trailer rig. I live in Northeastern NC. Thanks in Advance for your replies! RJ
  9. Big Mike, I think I will take your advice.
  10. Hey Guys, I was asked to bid on cleaning some high school bleachers. The floor of the bleachers is painted metal (paint is about 14yrs old) . The seats are alum. The guy told me that the engineer recommended a cleaning solution from Shermin Williams (believe he said 15% Soduim Hydroxide was one of the chemicals in the cleaning solution). The engineer said that solution needed to be used so that the new paint would stick to the surface. There is a little mold and a lot of gum on the floor. Also on the underneath portion of the bleachers the paint is chaulky. My question is what would be the best chemical to clean and prep this metal? Maybe just regular 12.5% and soap, or should I use something like a F18 mixture, or the Shermin Williams stuff? Thanks for your replies! rj
  11. I like simple green, mixed 50/50. Also, doesn't burn your skin.
  12. How much of the soap, plus 12.5% in a 5er?
  13. I am looking for a housewash recipe. I have been using SC with 12.5%, which does fine. But I am interested in knowing what kind of soaps I can get locally to mix with 12.5%, that I can use when I am out of SC. I have heard of Dawn, Tide, Casacade etc. Just looking for a mix to downstream out of a 5er. Thanks in Advance!
  14. I need some advise on my motor. I have a 20hp Honda twin motor, with a 5.6gpm general pump. It has about 250hrs on it. Today while pwashing, it cut off. I checked the oil and it has oil, and gas. If I let it cool for a few minutes it will start back up, and run for about 5 minutes and cut off. It won't start immediately after cutting off, it needs time to cool, and then will run for a few minutes and cut off again. Any suggestions would be greatly appreciated. Thanks in Advance for your replies!!
  15. How many of you use a high pressure filter? And should I be using one everytime I use my surface cleaner or turbo nozzle?