krypt

I wouldn't use a pressure washer since the paint is already an issue, I would use a mild chemical (mild chlorine with dawn mix with water) and do a soft wash. caution: Inspect the area before applying anything, You may want to add painting towards your bid also! Since the paint is coming off... be expecting some repair work and free painting if not contracted properly if you use a pressure washer......Specially hot water system... Also keep in mind the town may not like chemical run off hitting the side walk or street.... Good luck Steve

I just recently purchase a 110 gallon chemical tank, At the bottom of the tank it has a port hole! I was wondering if anyone has used an epoxy to patch up a port hole, and if so what is the best epoxy to use that would withstand 110 gallon of liquid with chlorine.. I would like an epoxy that would last for ever, with no worries of leakage in the future. It does have a rubber gasket in between, and I really don't have any reason to use the bottom port hole. Being my extra chemical tank i figure it will become a big issue in my cargo trailer some day... here are the pic i took to give you a better idea why I'm concerned.. disregard the date stamp forgot to update my camera lol Thanks Steve T.B.D.

Beth and Rod or anyone, do you happen to have any of these forms yet...I requested it awhile ago, But then this was posted awhile back and no response as of yet...thank you. bestdrywallers@live.com

Thanks guys I'll give it a shot... P:s Nice site Beth & Rod

Hey all, I got two enclosed cargo trailers, One is white and the other is burgundy red. There between 3 years of age and 7 years of age,some brown rust run where there are some screws that have been rusty, seem to me white sulfur on it also..... The trailers are in great shape but looks old because not cleaning the outside aluminum. Question: Just wondering what product you guys are using to clean your enclosed trailers with? I would like to do a spray and rinse system if there such a product out there! Waxing is difficult with a polisher since there are so many self tap screws. You think Citrus acid would harm the paint esc .... Thanks And have a wonderful spring... Steve T.B.D.

Dale, I know this is an old thread but if you still have some time, I would very much appreciate a copy also (excel). Thanks, Steve bestdrywallers@live.com

I've got a Mi-T-m HDS series Hot/Cold/Steam (Gas)and (Diesel) 5GPM 3000 PSI 21 Horse Vanguard in a 4x8 enclosed trailer with front opening to access my controls and double doors rear,Great for ventilation. Exhaust mounted to burner exhaust with a insulated pipe threw the roof. Great rig. Also a 3700 Psi Cold Pressure 13 horse Gtx Honda 3GPM, for when i don't feel like hauling my enclosed trailer around... Hmm no tanks as of yet! will be getting that for my birthday.. I hope...

Lisa get well soon, from Ma.

Is there any other places to buy the shurflo or Delavan rig? This is the only site that i know of thus far. MOBILE SPRAYING HAND CART - New Items at $429.00

thank you beth

I got a question if some one help me out! 2 part question. part 1: I've done interior and exterior log home for about 3 years and they are mostly newer log cabin. I've always used sodium hypochlorite (house hold bleach) mild soap and tsp mix. Seems to work fine! but I've run into a situation where this log cabin kit has been sitting for over a year and now has just been built, phew it's a nasty one to look at. UV line cross overs on logs,Gray beams,dirt/mud, and lots of clear clean wood mix threw out this house.... I know house hold bleach will not cover and clean this house on it's own, so i invested in buying a oxygen bleach and tested it on some grayed out wood at my home and it seemed to work but leaves fuzzy...i didn't pressure wash it just scrub and rinsed... hmm is there a better product out there in the market that will clean all above mentioned or am i going in the correct direction by using oxygen cleaner? and should i use a certain type of brightener after rinse rinse rinse :) to help promote the wood for a newer look? part 2: can some one give me some links to buy me a already setup shorflo pump sprayer unit. so far the only one i see is about $425.00 without shipping fee... any help on this issue is much appreciated... And to mention one more thing that may be important, the log cabin cleaning is interior in this case. it's a winter job with a furnace setup to keep the house warm/hot. Just in case some mention.. the duct work is not attached to the furnace lol thanks Happy Thanks giving all! Steve

Would this work or is not powerfull enough for what i need it for.... for the price would it be worth it or..? looking at the 10 Gallon Spot Sprayer 12 Volt, 1.0gpm Pump at Chemical sprayer pressure washer products and accessories

Thank you For the quick reply gentlemen I'm looking forward on getting one...

Hi everyone, First off I would like to say great place for getting all kinds of variety questions and answers of sort.... and I would like to say thank you, If no one has said so lately. Here is a question I'm sure some one ask in the past but can't seem to find an answer to "sorry". It's about setting up a Shurflo sprayer for my self. I've been reading in your forum about the Shurflo and really interested in making myself a portable setup on a cart of sort. OK here is my question I'm kinda stuck on. I use the chemical of oxygen bleach and I'm not sure witch pump or PSI i should buy since there are a few to choose from at northern tool. I would like to hook up a hose of 50-70 ft max. Which wand should i buy and tip if there is any on that particular wand suggested. Most of my work are interior and exterior log homes and I'm really sick of a backpack setup lol. anyone interested in giving the full spec of all equipment detailed for me of what i should buy in my case. and yes ima a newbie lol to Shurflo thank you looking forward from hearing from you Steve AKA Krypt