Isaac B

I miss my flat bed. i am not sure how best to set it up, but things i wanted was a ladder rack, machine in the front, tank over axle, more storage, and lower deck hight. I now use an enclosed trailer.

2 Just measure it up. They go fast and easy.

I would go with a longer bed, I filled up my 12' bed pretty quick. I now have an enclosed trailer. What I liked about the flatbed was easy to maneuver, looks, and fuel milage (diesel). It did get old fast lifting and tying down stuff multiple times throughout the day.

You are a professional (as implied by you signature) so do the professional thing.

Thanks Rick, mix while spraying is a good thing.

What is the benefit of a pre made unit vs a diy sureflow type of setup? I am getting some calls for resealing, and I want to be ready.

Had a huge commercial job last month, since then I cant get back on my old sleep schedule.

Thanks again, my first hot water machine.

Ok, tightened it up, it was very loose. But now the pressure relief is spraying some water. Should I replace this? It is not loose.

Getting my advertising is place, procedures in place for expected employees (a first!), new trailer lettering, looking for a used 20-24 inch surface cleaner, new tag line, ect.

Yup, about an inch of water in my enclosed trailer by the time I figured why I had no water @ the hose. I will check the other fittings, thanks!

Burst valve started leaking the other day. I replaced it, and now something els is leaking, either reed switch or flow I'm not sure. Do these things normally go out? Or something worse?

Thats too crazy for me, i would've rented a 32' for 25 bucks.

I have good results with a basic house wash mix with F13 mixed in, don't let it dry, it will leave a residue.

Heres some pics before after stained