Jump to content

jobalthough

Members
  • Content count

    25
  • Joined

  • Last visited

  • Days Won

    4

Posts posted by jobalthough


  1. On 6/17/2010 at 8:44 PM, dmclone said:

    I just recently had a 6ft cedar fence installed. I've researched all over about prepping before I apply the stain. A friend is recommending this:

    Does this sound correct? Any other tips? This wood is new and has never been stained MillCreek Fence Company. I want the stain to be able to soak into the wood.

    I am looking to replace my old cedar good neighbor fence after some winter ice damage. Anyone have a recommendation on a good Portland area installer? Thanks for any advice that you can provide.


  2. 1 minute ago, jobalthough said:

    Hey everyone! I'm in the process of exploring corporate cleaning services for our office, and I could use some guidance. Our workspace needs a top-notch cleaning solution that not only ensures a healthy environment but also meets our budgetary constraints. I'm curious to know about your experiences with different cleaning companies – which ones have you found reliable, cost-effective, and efficient? Are there any specific questions or criteria you recommend I consider when evaluating potential cleaning service providers? Any insights or recommendations would be greatly appreciated.

    thanks in advance for any help


  3. Hey everyone! I'm in the process of exploring corporate cleaning services for our office, and I could use some guidance. Our workspace needs a top-notch cleaning solution that not only ensures a healthy environment but also meets our budgetary constraints. I'm curious to know about your experiences with different cleaning companies – which ones have you found reliable, cost-effective, and efficient? Are there any specific questions or criteria you recommend I consider when evaluating potential cleaning service providers? Any insights or recommendations would be greatly appreciated.


  4. Hey everyone. I hope you're all doing well. I have a bit of a cleaning dilemma and could use some advice. How do you deal with stubborn stains and persistent odors in your homes? I've tried various cleaning products and techniques, but some of these stains just won't budge, and the odors keep lingering no matter what I do. Specifically, I'm struggling with a few troublesome areas like the grout in my bathroom tiles and an old pet accident spot on my carpet. I'd love to hear about any tried-and-tested methods or specialized products you've used to tackle these issues effectively. Professional cleaning services Toronto


  5. On 5/22/2007 at 4:17 PM, PRESSURE PACKED said:

    I Dont Even Know How Somebody That Reads This Board, Would Even Attempt That Job With A 4gpm. Thats Like A Homeowner Cleaning A Parking Garage, A Bigger Machine Will Save You Money

    1. You Can Keep It For Future Jobs

    2. You Will Be Able To Do This Job Yourself.

    My Advise

    If You Have Decent Credit Ask For Loan. Sometimes Pressure Cleaning Equipment Stores Have In-house Lenders

    Or Sub It Out And Take A Percentage floor preparation Brisbane. Then With That Money Buy A New Machine.

    Basically Buy A New Machine!

    Did I Mention To Get A New Machine

    Determining an appropriate bid for a specific project involves considering various factors, such as the scope of work, labor and equipment costs, market rates, and the specific requirements of the client. As an AI language model, I don't have access to real-time data or specific knowledge of current market rates in the Chicagoland area. However, bidding at $0.10 per square foot for a project involving cleaning a 3-story parking garage with a total square footage of 480,518 does result in a bid of $48,051.80. Keep in mind that this is a rough estimate based solely on the information provided. It's crucial to conduct proper research, consider all project details, and possibly consult with professionals in the industry to ensure an accurate and competitive bid. Additionally, note that costs can vary depending on the level of dirt and salt buildup, any additional services required, and the specific cleaning methods and equipment needed. It's important to thoroughly assess the project and communicate with the client to ensure you understand their expectations and requirements. Ultimately, it's advisable to carefully consider all relevant factors and conduct a comprehensive cost analysis to arrive at a fair and competitive bid for the project.


  6. On 7/17/2021 at 12:19 PM, 4ccservice said:

    Moving is for sure stressful without an adequate plan about getting it properly cleaned. Conducting a detailed cleaning before one move out is valuable for both the parties. And in case of depositing a security amount, it is significantly important commercial cleaning services 30a. We the 4ccservice is here to take your all anxiety off in moving. We offer flexible move in and move out cleaning service San Antonio to relieve your shift to your new domain.

    I am exactly looking for this


  7. i plan on rinsing it down with water to clean out the pores of the concrete. im wondering if i should use some type of soap or detergent though. i know not to use muriatic acid or TSP, but would using soap and water hurt it? or is there another cleaner i should use instead? Im debating what type of acid stain to use as well, as im sure all of them are not created equal, and even more important the sealer. i assume home deport/menards will sell a marginal product at best? is this something i should order online so i can get contractor grade products ? I am thinking the kemico cola color will fit the bill for the floor... any recommendations for a wall color to compliment this floor? i will probably paint the wall, unless i use a facade like the fake tile or fake wood thats used for floors. sorry for the barrage of questions. any tips/advice is as always, greatly appreciated thanks


  8. Hello all. Well as you all may be well aware of, working on your car, makes messes, stains floors! I personally don't care to much but my land lord threw a fit when he saw some of my floor lol So he want it cleaned up! Heres what I have... Garage floor is concrete and the backyard has concrete pavers. The stains I have on there are, transmission fluid, pb blaster, grease, just car gunk/grease/grime stuff that fell of suspension and other parts of the drivetrain during removal. Heres the big one! I got a bucket and filled it with white vinegar to drop some suspension parts in, well after about a week it turned kinda orange and I took it out into the backyard and took out the parts layed them on the floor and sprayed them with my pressure washer. Left that orange tint residue on the floor, and that the one I cant remove! I have tried the simple green purple heavy duty cleaner, the purple power cleaner, I do have some of that kitty litter oil stuff, not sure if Im using it right because it doesnt exactly make it look like nothing was ever there, and thats if it even lifts some of the stain, dawn liquid soap.


  9. On 1/20/2023 at 9:11 PM, jobalthough said:

    When covid hit my company in its very finite wisdom shipped my facility about 20 4L jugs of various hardcore liquid cleaning products. Most of these get diluted with water (one at a ratio of 50 parts water to 1 part cleaner) and we will never use it up or even come close. It's probably meant for floors and we have carpeting.

    I called one hospital and one nursing home and both declined to take any. The City of Toronto seems to suggest that we take it to a disposal site.

    I hate the thought of all of this poisonous stuff going into a landfill when it could be useful for disinfecting, and any advice or help would be appreciated.

    thanks in advance for any help


  10. When covid hit my company in its very finite wisdom shipped my facility about 20 4L jugs of various hardcore liquid cleaning products. Most of these get diluted with water (one at a ratio of 50 parts water to 1 part cleaner) and we will never use it up or even come close. It's probably meant for floors and we have carpeting.

    I called one hospital and one nursing home and both declined to take any. The City of Toronto seems to suggest that we take it to a disposal site.

    I hate the thought of all of this poisonous stuff going into a landfill when it could be useful for disinfecting, and any advice or help would be appreciated.


  11. On 5/19/2021 at 8:57 AM, copgib said:

    Hi Guys, it has been awhile since I have been on this forum. I would like to get your suggestion on where i can buy a good quality Extension wand for tall buildings. During my 16-years in the business I have just hooked wands together to get the height I needed for contractor websites. I am cleaning a lot of tall banks now and will have to breakdown and get an extension wand to save my back. So any suggestions on what to get and where would be appreciated. Thanks Hugh Gibson (copgib)

    simpsons-wiggum.gif

    Hi, Currently I am looking for a reliable and efficient contractor to quote for my new EA. Is there anyone out there who can recommend my own or some friend's contractors? Please share and list out those contractors who deserve to be mentioned. For the moment, I have gotten 2 contacts (through this forum). I am still waiting for their quotations. Wish to find more contacts for comparison.


  12. I wonder about this one. When we grew up, it was always once a week. You dusted, cleaned the bathrooms, washed the floors, and vacuumed. In the kitchen, it was almost daily, the countertops, sink, garbage out, any extra messes in the fridge and stove, etc. It seems w/ the busy lives people have and much working full time, it would be nearly impossible. Many have paid house cleaners. Is that how people do it nowadays?  deep cleaning services 30a


  13. On 12/8/2022 at 2:17 AM, jobalthough said:

    Thought I had this all figured out, did a test patch (under stairs, wont be visible) and I'm not thrilled. Back to the drawing board?

    I'm trying to achieve a nice leathery-brown marbled floor (see first picture attached). Love the high gloss wet look, however I'm leery about that high gloss finish wearing away fairly quickly (quicker than a permeable sealer would?), especially with acrylic top coats. Hobby work and project garage with vehicle storage, in the northeast so salt is used (sparingly on our roads it seems...). Right now the garage is completely empty, now is the time - I'd like to do it once and do it right.

    I decided on direct colors acid stain - I really like the unique and interesting results an acid stain (should, typically) produce. After doing tons of research I thought I had decided on ghostsheild as a protectant, most likely 8510 but also wanted to try a little bit of their 5505 for fun.
     

    I did my sample, need to perfect my acid stain process a bit but I think I've got that under control now - put 8510 over half and 5505 over the other half of the sample patch. I thought 8510 was going to be the answer. But it doesnt deepen the stain colors at all, it just looks BLAH (which I knew... but just didnt comprehend how it would effect the final product). I really like the way the floor looks with the 5505, that wet deep color glossy look - but its my understanding that 5505 is an acrylic coating and it sounds like it wont hold up well to our uses (??).
    I set an empty grill propane 20 pound grill tank on the test surface, dragged it a bit, and there was noticeable scratching/discoloring.

    So, what do i do?
    8510 with a wax over it to help deepen the color?
    5505 and baby the floor hope it'll hold up well? If its not going to hold up I dont want to bother.
    Or investigate other options: How about some of these Polyuria or polyspartic? Not sure why I didnt focus on these to begin with?
    concrete stain Raleigh
    VOC's and cure time are not important, want to do it right. And while cost is always important, I'd rather pay more now and do it right.

    Help!!

    no resposne to this


  14. On 9/20/2006 at 6:36 PM, ASE Marc said:

    Hey everyone, I was wondering if anyone out here did acid eching and epoxy floor sealing of warehouses ect... We just started are sealing company up this year and are overwelmed with the opportunities that it can lead to industrial epoxy flooring toronto. Basically up until now we have only been cleaning and sealing outdoor "porous" concrete, but recently were asked if we could do a 15,000 sq ft. warehouse. This would be a great market for us to get into, especially for winter work. So I was wondering if anyone had any experience with this type of work and if so I have many questions... 

    I have a client that is interested in using one of the epoxy based industrial/commercial flooring products. The stuff you put a sealer and/or a de-coupling membrane down for and then apply the liquid epoxy with some added aggregate and then top-coat with polyurethane. Does anyone have experience with these products and/or recommendations for a manufacturer/supplier? Thanks


  15. Did my first slab/countertop today. Easy Peasy. I was going to pass on it because I had never done it before but after researching it (youtube) I took it on and it was super simple. The condition of the concrete is very important. One thing I was impressed by was that after it had sat a while you have to wash off any excess and after I had done an initial rinse,it was not coming off any more, and this was after only a couple of hours. Good money-making opportunity. I used Lithochrome acid staining boston


  16. Thought I had this all figured out, did a test patch (under stairs, wont be visible) and I'm not thrilled. Back to the drawing board?

    I'm trying to achieve a nice leathery-brown marbled floor (see first picture attached). Love the high gloss wet look, however I'm leery about that high gloss finish wearing away fairly quickly (quicker than a permeable sealer would?), especially with acrylic top coats. Hobby work and project garage with vehicle storage, in the northeast so salt is used (sparingly on our roads it seems...). Right now the garage is completely empty, now is the time - I'd like to do it once and do it right.

    I decided on direct colors acid stain - I really like the unique and interesting results an acid stain (should, typically) produce. After doing tons of research I thought I had decided on ghostsheild as a protectant, most likely 8510 but also wanted to try a little bit of their 5505 for fun.
    acid staining san antonio
    I did my sample, need to perfect my acid stain process a bit but I think I've got that under control now - put 8510 over half and 5505 over the other half of the sample patch. I thought 8510 was going to be the answer. But it doesnt deepen the stain colors at all, it just looks BLAH (which I knew... but just didnt comprehend how it would effect the final product). I really like the way the floor looks with the 5505, that wet deep color glossy look - but its my understanding that 5505 is an acrylic coating and it sounds like it wont hold up well to our uses (??).
    I set an empty grill propane 20 pound grill tank on the test surface, dragged it a bit, and there was noticeable scratching/discoloring.

    So, what do i do?
    8510 with a wax over it to help deepen the color?
    5505 and baby the floor hope it'll hold up well? If its not going to hold up I dont want to bother.
    Or investigate other options: How about some of these Polyuria or polyspartic? Not sure why I didnt focus on these to begin with?

    VOC's and cure time are not important, want to do it right. And while cost is always important, I'd rather pay more now and do it right.

    Help!!


  17. On 12/4/2022 at 5:11 PM, jobalthough said:

    Has anyone or known of anyone whom has Acid Stained their concrete flooring? We are seriously considering this in our bottom story. From our research it appears this is a very long lasting, rather inexpensive to do flooring; with what appears as beautiful results. We will probadly have to travel all the way to Springfield MO to purchase this stain; unless someone knows of a place it is sold in North Arkansas. We looked at Lowes and Home Depot and they do not carry the Acid Stain just the topical stain. IF you have done this WHAT are the Do's and Don'ts that we may advoid. And WHAT were your results? Are you pleased with them? Thanks...  acid staining arkansas

    no response to this


  18. On 1/23/2006 at 4:11 AM, Celeste said:

    Oooh! Oooh! Oooh! I want to come help you!

    Okay, if you get in at the right time, you can acid stain the actual slab to use as the visible floor treatment. Depending on what you want the final result to look like will depend on whether you add another microlayer of cement to the slab. Acid staining has a lot of variables - type of concrete, who pours it, grade of cement, etc... and with all of that comes the unpredictability of the results. The upside to doing this to the original slab is that you're not changing the original height of the floor only the slab itself and keeping that in mind, you can cover it very very easily if you don't like your result. The "resurfacing" that we do does consist of applying another coat of cement and either using an integrated color system or hand coloring with more than one color.

    I'm not sure if what Jim does is the same - most acid staining is more alike than different but his overlays may have different methods and maybe he'll pipe in here as well :)

    Celeste

    Has anyone or known of anyone whom has Acid Stained their concrete flooring? We are seriously considering this in our bottom story. From our research it appears this is a very long lasting, rather inexpensive to do flooring; with what appears as beautiful results. We will probadly have to travel all the way to Springfield MO to purchase this stain; unless someone knows of a place it is sold in North Arkansas. We looked at Lowes and Home Depot and they do not carry the Acid Stain just the topical stain. IF you have done this WHAT are the Do's and Don'ts that we may advoid. And WHAT were your results? Are you pleased with them? Thanks...  acid staining raleigh


  19. On 8/23/2012 at 3:19 AM, Chappy said:

    Thanks Pete Cuesta for the help on this one.

     

     

    Hi, I Just finished getting some concrete pavers laid (During the rain) epoxy vegas. Because of the light beige color, I want to seal them to protect them from dirt. I have had some prices to get them sealed and the price has totally shocked me! $600 to $700 or about 15psqm I am pretty sure it could not be that hard to coat about 40SQM of them Does anybody know or can recommend a good quality sealing product that I can use? It is only a courtyard but it is a main entrance to the back door and there is a chance we will be BBQing there. What type of product should I use, an acrylic sealer or another? Any other info that may help or is $15 .00 SQM a fair price? Thanks,


  20. It seems that my golf cart batteries dripped onto a buddy's new concrete while my cart was parked there over the course of a few weeks while I rebuilt my storage room. The stains are orang/tan and I do have a couple of places where the concrete blistered. Not concerned much about the blistered area as I will skim it with some patch. The solution to the stain problem and how, please? What will remove the stain or bleach the concrete back to the normal off-white color?  concrete sealing jacksonville


  21. On 8/23/2022 at 9:22 PM, jobalthough said:

    Hi guys, I have been asked by a customer to lay ceramic floor tiles have always told people not to use ceramic on the floor as it can break easily. But she is not budging on the tiles. It's only a small area of 3x2 m2 in a kitchen. Does anyone have any tips on floor refinishing or advice on laying ceramics on floors as I've never done it? I haven't seen the substrate yet but guessing it's concrete. Thanks in advance.

    no response


  22. On 12/16/2006 at 8:05 PM, Beth n Rod said:

    For your consideration...we do janitorial work and this is something we have done in the past so from our experience standpoint, I pass it on for anyone else to use.

    You will need a wet vac. You will need Hot water to get this to work well.

    Apply your chem and agitate, especially the grout using a brush. Give it some dwell time and apply again where needed and then use the vac to extract it.

    Some use a low rpm rotating brush machine to clean tile and others use steam machines similar to those for removing gum. If you can find a unit for rent, there are lvlp units that use a surface cleaner with extraction to clean tiles. They operate at about 120-160psi and <2gpm.

    Afterwards, and the grout comes as clean as you can get it, once dry, apply a grout sealer just to the grout with an applicator bottle that has an applicator brush that is fed from the bottle. Most tile distributors and supply stores have them. This is of course if you charge to have this done. It is not expensive, the sealer costs around $6.00 and the applicator bottle around $3.00, but the time is what you should be charging for. It will take you about 20-30 minutes to do the application.

    Rod!~

    Hi guys, I have been asked by a customer to lay ceramic floor tiles have always told people not to use ceramic on floor as it can break easy. But she is no budging on the tiles. It's only a small area 3x2 m2 in a kitchen. Anyone have any tips or advise on laying ceramics on floors as I've never done it. I haven't seen the substrate yet but guessing its concrete. Thanks in advance.

×