High Pressure Filters

[rj242 16]

How many of you use a high pressure filter? And should I be using one everytime I use my surface cleaner or turbo nozzle?

[Paul Kassander 26]

They are helpful with the smaller size nozzle on the surface cleaner to prevent any clogging and help to prevent wear on the turbo nozzles should you have any small debris that makes it through your inlet filters.

[troikarestoration 14]

We use them on all turbo nozzles. It has saved $ when a nozzle is $100+ it's a good investment. You need to make sure there's a good filter sytem on your water inlet as well, this is a pump saver. Just a screen is not enough.

[Joe Ortiz 14]

I have two screen filters before the pump and have never had any problems.but one time my helper put the SC down gun first and got dirt in there and cloggen a tip. it was a PITA to remove,then clean and reset. so it might help but i wont use them IMOya dont needem

[One Tough Pressure 580]

I do not use them on any of the surface cleaners, but do have one on the turbo that never gets used.