schrec
-
Content count
72 -
Joined
-
Last visited
Posts posted by schrec
-
-
Have you come yet? I live up in Williamsburg, and our guys were in smithfield yesterday.
-
marco, you said you just changed the fluids, maybe you didn't put enough oil back in it. (low oil shutdown)ditto
-
If it is the "green non slip coated" surface you'll kill it with the surface cleaner. Most just use a very strong housewash mix to kill the mildew and light "fanned out" rinse.ditto
-
not trying to offend, but how is this supposed to take 8 hours. How is your process? How cold is it up there?
-
The times our big guy bars broke we hit something.The nozzle pops out or the whole bar breaks at reducer. THat is my experience
-
I dont have permission to visit your home page
-
nevermind
dude is this thread real
-
If you have 5 gal or less machine, 1 gal of bleach per bucket should do it.
Or you are doing it wrong, sorry to be blunt. Half gal of soap tops.
-
Gutter cleaner cleans oxydation perfectly. found that out by accident. but use it now when needed
-
you have to guesstimate for your own machine. we used to use cheap laundry soap. cap or two. made it smell good too
-
hey traci, how much to get it to me?
-
I paid $137.00 per 55. not good with math
-
Try the Ready Seal semi, from Sunbrite. It is virtually unscrewupable, goof proof.
-
Sorry, I didnt think that could happen.
-
Dude, Xjet. It has low pressure high volume. The only time I have left a house with residue was from soap. How much gpm/psi are you using? We just bought a new pump from Bob. It is about 7gpm, and goes up to bout 250psi. it is cool. Your soap isnt strong enough or you arent leaving it on long enough, or it might be soap residue and its not getting rinsed good.
-
I am glad you didnt get hurt.
-
Anyone try steam/ hot water? Works for me
-
The first step in the Restora process can be subbed by gutter cleaner. It does the exact same thing
-
I'm feeding by-pass water back to the tank so it will cool down.If it just goes in a short looping tube and right back into the pump then it (the water) doesn't get much of a chance to cool down.
Cool down from what? the pump? how does the pump heat the water?
-
You need the water level in the tank to be higher than the pump inlet.
-
Bypass Tank? The bypass on my K7 unloader goesto a T at the water inlet into the pump. It is not needed for a long hose going back to your tank.
-
Flatwork is driveways, sidewalks, etc.
We have 13hp running 4gpm at 4000psi cold
-
simple cherry does make it smell better. so does a cup of flowery Xtra laundry soap.
I am not knocking anyones way of doing it, but I just like doing it the easy way.
-
What size machine do yall have? I have a 5 gpm, with no proportioners on the x jet. I use average 12 gallons on a 2500 sqft. house. A 4 gal will use more with the same xjet. I put 1 gal 12%sh in it and a splash of degreaser for suds. Yall have these difficult recipes for your house wash. When we started we used bleach and laundry soap. Anything other than the bleach is overkill. use soap for suds, so it can stick. Dawn, Tide, or your local stores degreaser, it is only to help the bleach stick.
The bleach is the active agent. If anyone disagrees let me know
Just pranks.....
in The Club House
Posted · Report reply
Thats wrong, but funny