RSuds

. Ya Jim is losing it???

Sounds like fun. Enjoy.

You need to put the stripper on straight and let it sit for hours, keep it wet and clean it and then do it again. Also you will need to sand it. Charge a lot. We have done a lot of them and every time I hate it.

We have done it on really large decks but yes you need to know what you are doing. You must lift up and go fast at the ends and do not go sideways.

1 side at a time and wet all flowers and bushes first and after.

You can do it any way you want.

Yes it is a good spot. Be careful of any hoses. We broke a connector in the gas line when we first did it and then we made sure it was all out of the way.

I know that it goes down in water flow but it did not feel like it was that much of a difference and I wanted to share it.

I called cat and they told me that I would lose 400 psi for every 100 feet of line with the 3/8 and 100 psi for every 100 feet of 1/2. But my test showed that it was about 200 psi and maybe 50 psi. I do not know about the water flow but it did not seem like it was that much of a difference. We do more buildings and homes so I was looking at how high we can shoot the water and chemical and it was really no difference. The surface cleaners already fly.

Yes we have 10 gal. And 5 gal. Machines on all our trucks and one with 2-10 gal. and 1-5 gal. With residential it is very fast. Water can be a problem at times. We also do a lot of apartments and condo's that we can fly threw very fast. We did 25 good size buildings last week in 4 days with 3 guys and 3 machines. I like it fast and efficient, just ask my wife.

What sealant would you put on this deck and would you seal the cedar ceiling?

We have done a lot of RS and woolmans and recoated them but never Armstrong?

Thanks Jim I will fall and talk about it RS is what I am used to. And stripping the ceiling is not in my future.

I have never used Armstrong? Why should I use it on my deck over the ready seal?

I am not sure what kind you are saying but it looks like ready seal? This is my deck and I have not done it for 2 years. I never did the ceiling and was thinking of doing it. Maybe Armstrong? I told Jake I would try his stuff. Nice guy.

You do not need heat for residential work. Spend your money on bigger gal. Flow machines and you will go a lot faster.

600.00 single 1,000.00 double. Love and fast surface cleaner or rinse.

You do not need the heat, spend more money on Gallon Flow. Buy a 6 or 8 or 10 gal. cold and you will be happy.

Sorry, I should have left the keys but I did not want them to take it for a spin.

No ladder needed. If it is real bad you may need to make the chemical a little stronger and soap it a couple times.

With our set up and 2 guys it should take maybe 1 hour and yes 400. sounds about right. You do not need hot water.

Congrats, I thought we were only to have kids in the off season? Let me know when you are at the inlaws. I will buy you a beer.

You do not need hot water for residential work. Why do you guys want to mislead him. Hot water is more for grease, oil, gum. Use the proper chemicals and save the lawn.

I know we are all very tired and hate some of our customers, I would like for the phones to just stop for 1 day. But this is not the way we should be thinking, Keep trucking, we do not have that much longer till it will slow down and winter will come. For all us Northan people we have till around july 4th and it will slow down a little. So lets make June are best Month Ever!! After 20 years April was my best month ever and May ? but June will be a lot better because I'm ready and I'm happy to be making money. So lets be happy and make June the best month EVER.