jkevin
-
Content count
55 -
Joined
-
Last visited
-
Days Won
1
Posts posted by jkevin
-
-
-
thanks to both of you i will check it out in the morning any suggestions on replacement 13 hp 3.8gpm 3200 psi i think
-
little problem here have a house wash coming and pulled my landa cold water with 13 hp out started right up just fine but when i release the trigger it is like the motor siezes up and shuts off but starts right back up as long as i hold the trigger open, any ideas? kevin
-
i will do that thanks
-
don,t have either something at auto parts store maybe?
-
have a landa cold water 3500 psi 4gpm my question is when i pull the rope to start it seems to build pressure so i need to have the trigger pulled in order to start. any clues why?
-
looking for a wax no time to order any and it seems i cannot get any zep wax any other good ones to use in a pinch? thanks
-
i got it just had to sit and look at it for awhile
-
picked up a landa water jet but no manual. it seems to vibrate and i wanted to check with alignment tool but not sure where to put it. anyone know where i can download the manual or a picture of how to place the guage thanks kevin
-
i agree there are many but this is the one i come to and search for answers
-
thanks a freebie for knights of columbus did not wanna drag my trailer out
-
ok decided bleach is the thing to use for leaf stains now hot or cold water to complete the job?
-
did i hear right maybe a show in the dells comeing soon?
-
i am sure i saw this someplace but cannot find it. is there some place to get a wand that has more of an angle on it i do alot of mobile homes and would like to have more of a direct spray pattern rather than up. or maybe an idea how to make one?
-
just an old weathere pt deck
-
guess i will have to just play around and see thanks anyway
-
not sure if tyhis is the right place for this but i am hoping. premix cleaners 1 gal cleaner to 4 gal. water for downstreaming so what would the dilution be for using a pump sprayer?
-
had some issues a couple of weeks got pnumonia(spelling) got over that but dr. found things on my lungs after a ton of tests he says maybe from mold. not done testing but that is his thought. anyone else hear of this or some exp with it? all i know is when it clears enough to work again a mask will be added to tool box
-
some times xylol not sure if spelling is right
-
all you need to do that is use xylene . the reason it was bubble is because it was not thinned it out with xylene i have had that happen a few times when i sealed concrete
-
i have a deck to clean trated material not sure what it has for stain and or sealer but it is starting to flake and it looks like a this piece of plastic any ideas? sorry no photo. what type of cleaner might you suggest? thanks forgot to had will ds
-
will the power house remove move and mildew too? hard to get good money here small town i guess ppl are watching there pennys but it does not mean i am gonna give up. got my surface cleaner comeing soon going to try and get some flat work
-
now that i think about it i guess 2 hrs not bad had to shut pw to move around a few times and use the hose to rinse gutters but, i thought it would go quicker. more practice i guess
-
paul i forgot to mention i did have soap in there the dawn trick the house wash went good just the dam gutters.. i really would like to get to mill. but i have to work those days. unless i can make some "extra" money to cover them 2 days is there still room or is it close to the 75 ppl?
landa 4-3500
in Tools, Equipment & Basic Maintenance
Posted · Report reply
quick question i am going to pick up some nozzles but unsure of which ones i know you go by your machine but my pump is a general ts1011 which says 4.5 gpm and my machine says 3.8 gpm 3500 psi. which should i go by or are they so close it does not matter? thanks