jkevin
-
Content count
55 -
Joined
-
Last visited
-
Days Won
1
Everything posted by jkevin
-
quick question i am going to pick up some nozzles but unsure of which ones i know you go by your machine but my pump is a general ts1011 which says 4.5 gpm and my machine says 3.8 gpm 3500 psi. which should i go by or are they so close it does not matter? thanks
- 1 reply
-
- 1
-
-
little problem here have a house wash coming and pulled my landa cold water with 13 hp out started right up just fine but when i release the trigger it is like the motor siezes up and shuts off but starts right back up as long as i hold the trigger open, any ideas? kevin
-
bump...
-
thanks to both of you i will check it out in the morning any suggestions on replacement 13 hp 3.8gpm 3200 psi i think
-
looking for a wax no time to order any and it seems i cannot get any zep wax any other good ones to use in a pinch? thanks
-
have a landa cold water 3500 psi 4gpm my question is when i pull the rope to start it seems to build pressure so i need to have the trigger pulled in order to start. any clues why?
-
i will do that thanks
-
don,t have either something at auto parts store maybe?
-
picked up a landa water jet but no manual. it seems to vibrate and i wanted to check with alignment tool but not sure where to put it. anyone know where i can download the manual or a picture of how to place the guage thanks kevin
-
i got it just had to sit and look at it for awhile
-
i agree there are many but this is the one i come to and search for answers
-
Leaf stain in slabs - how to shift?
jkevin replied to Richard Ivy's question in Residential Pressure Washing
thanks a freebie for knights of columbus did not wanna drag my trailer out -
Leaf stain in slabs - how to shift?
jkevin replied to Richard Ivy's question in Residential Pressure Washing
ok decided bleach is the thing to use for leaf stains now hot or cold water to complete the job? -
Bloopers-PWNA Funny pressure wash Demostrations-Bloopers
jkevin replied to Ron Musgraves's question in The Club House
did i hear right maybe a show in the dells comeing soon? -
i am sure i saw this someplace but cannot find it. is there some place to get a wand that has more of an angle on it i do alot of mobile homes and would like to have more of a direct spray pattern rather than up. or maybe an idea how to make one?
-
not sure if tyhis is the right place for this but i am hoping. premix cleaners 1 gal cleaner to 4 gal. water for downstreaming so what would the dilution be for using a pump sprayer?
-
just an old weathere pt deck
-
guess i will have to just play around and see thanks anyway
-
had some issues a couple of weeks got pnumonia(spelling) got over that but dr. found things on my lungs after a ton of tests he says maybe from mold. not done testing but that is his thought. anyone else hear of this or some exp with it? all i know is when it clears enough to work again a mask will be added to tool box
-
Help stripping old sealer off stamped concrete
jkevin replied to patriot pressure washing's question in Residential Pressure Washing
some times xylol not sure if spelling is right -
Help stripping old sealer off stamped concrete
jkevin replied to patriot pressure washing's question in Residential Pressure Washing
all you need to do that is use xylene . the reason it was bubble is because it was not thinned it out with xylene i have had that happen a few times when i sealed concrete -
i have a deck to clean trated material not sure what it has for stain and or sealer but it is starting to flake and it looks like a this piece of plastic any ideas? sorry no photo. what type of cleaner might you suggest? thanks forgot to had will ds
-
did a couple of traiers today nasty gutter and soffit used a brush on them and pw on the resty of the house. standard dbl wides 28*32 or something like that a little over 2 hrs each. does that seem slow? if there is anyone in wisconsin i would like to tag along some time to see how somwone else does it. thanks
-
will the power house remove move and mildew too? hard to get good money here small town i guess ppl are watching there pennys but it does not mean i am gonna give up. got my surface cleaner comeing soon going to try and get some flat work
-
now that i think about it i guess 2 hrs not bad had to shut pw to move around a few times and use the hose to rinse gutters but, i thought it would go quicker. more practice i guess