BigPete

don't forget this guy. Untitled Document

turn on your internuts

looks just like it

https://www.forsalebyowner.com/20929341 http://homes.realtor.com/prop/1083778198

YES! ;)

I do not know about your house, But when we built ours, it came with, among other things, a manual (printed in 1998) explaining the construction features and basic maintenance of our new home. Inside was a pretty good explanation of how to clean and maintain both tile and shingle roof systems. both recommended using sodium hypochlorite and water and low pressure rinse. I know they didn't just print this for me. Everybody that builds a new house or gets a new roof probably gets something like this, they might not read it, but they probably get it somewhere in the literature they receive. When I buy pool chlorine, there are detailed instructions for shingle roof cleaning printed right on the label. They are written there for the average homeowner. This is the same liquid any consumer can buy even in the grocery store at 10% concentration. I hope you don't think any of this information came from your posts leaking out to the internet revealing your secrets. There are plenty of trade secrets, but few, if any, have to do with how we clean or what we use to clean with. DON'T BELIEVE THE HYPE!!! GOOD NIGHT NOW!

They provide labels for you to take and put on your drums or tank or whatever you put it in. They are usually on a big roll by the tank or in the back of the store. At least all the places selling bulk Sodium Hypochlorite around here have them. You should already have your tanks clearly labeled anyway.

Here is the form: FORM 4136 Please note - if you get a tax credit this year, you need to claim it as other income on next year's taxes Here are instructions - PUB 378 It is probably best to have a professional tax guy handle this.

slow down, take a deep breath and mix in a period once in a while. :lgwave:

flying saucer Focus man Focus!

glad to see you're keeping it up.

How about this for an idea, ladies? CLICK HERE

oops.:whoops: ...Factories in Taiwan used to assemble the world's computers; now China does. Hong Kong garment workers used to stitch tons of fabric into finished clothing; now Chinese workers do. And Japanese plants once manufactured the world's most popular consumer electronics brands, like Hitachi, Sony, Panasonic and Toshiba; now many of them are shipped from Chinese ports... ...Japanese and South Korean companies are also coming to China in force. Panasonic of Japan now has 70,000 employees working in China; Toshiba's largest information technology production site in the world is in the Chinese coastal city of Hangzhou. And Samsung, the South Korean company, has 23 factories, 50,000 employees and all of its notebook PC production in China. Its last computer notebook factory in South Korea closed last year... ;)

If the motor runs, the switch should be ok, or at least "ON".

i didn't see any underlining, just large red letters.;)

here's a link

to change pump speed, you will need to change pulleys - one or both

and you went and bought 3 new surface cleaners that you didn't need.;) sorry to hear about your loss, hope everything works out. Try 4.5 in it with that pump. Even then you will be tearing up most of our fine Florida concrete. It's cool though, some people like to see the pretty rocks and shells. :lgsideway

You may need to downsize to get it to work properly - I have 1/4 inch hose on my bypass. 3/8" would cause the unloader to cycle in and out. Have had no problems since going to 1/4".

I have them and they work fine for me. They plumb like any unloader.. Out goes to gun, in comes from pump, bypass goes to bypass.

they are not for high pressure they are for AC hoses. heres a link

what about this baby ...

sweet pic!:lgsad:

better check again. Not even close;)

Would it kill you to buy a stamp. I would have called the cops on you. Just being honest, doesn't make me a bad person.