Don Phelps

A guy over on *** said he got 27 stores. So if anyone is interested, now's the time to call! **********/board/upload/showthread.php?p=47163#post47163

This question is for any of the guys/gals in the South that have advanced wood knowledge. If you were to have the deck of your choice built (money not an issue), what would be the preferred kind of wood and stain used for the project? I realize there will probably be varying opinions and that's fine, but just share your opinions for what materials and why. Thanks in advance!

You're very welcome! I have access to all the same products they do, so if I can ever help you out with an equipment quote please let me know. I'll do my best to make it as seamless and trouble-free as possible.

You can turn the valve and hold it down and light the pilot with an aim-n-flame if it's easier. Although you probably heard the propane as you opened the valves on the tanks, sometimes it takes up to a minute to reach the igniter. At least that was my experience with it. Mine came from PressurePro, which is who Water Cannon buys theirs from. Are you opening both tanks at once or just one?

By 'tanks' I assume you have a propane-fired hot box. If that's the case, take the panels off the sides at the bottom and press the igniter button. You'll eventually see where it's sparking. Did you have them purge your tanks before filling them? Sometimes it takes a minute or two for the propane to reach it's way to where it will ignite. If you can't get it fired, feel free to give me a call tomorrow or Monday.

Hi Shane, You'll find plenty of info by following this link. http://www.thegrimescene.com/forums/forumdisplay.php?f=67 You can also use the search function at the top of the page.

The info that I found on it states that it's for 2.4 to 10.8 gpm. It has a 3/8" inlet with a 1/2" discharge and 1/2" bypass. I see no reason why it wouldn't work. Flow-actuated unloaders can be somewhat fickle when setting up, but after the bugs are worked out they're easier on equipment and the body.

Why not use reducer bushings to whatever size you want?

I couldn't agree more.......Thanks Beth and Rod! YOU GUYS ROCK!!!

Hi Barry, I'm assuming that you're using 3/8" i.d. hose. If that's the case, a #6510 should be plenty large enough. I would consider adjusting the pump at the head. There is a screw there for adjustment. If you're using smaller i.d. hose, back pressure is probably causing the problem.

Hi John, We've always used the ShurFlos with viton and santoprene seals and valves. If flushed immediately after each use, they'll last quite a while. Occasionally a pressure switch will need to be replaced, which is often due to too much back pressure causing the switch to cycle back and forth. A larger orifice will usually eliminate this problem. With regard to other kinds of seals (teflon, nylon, etc.), we've never felt the need to try them. As previously mentioned, as long as it has viton and santoprene seals and valves and is consisitently rinsed after each use, it'll serve you well. Here is a link to the most commonly used ShurFlo. http://www.northerntool.com/webapp/wcs/stores/servlet/product2_6970_9414_9414

Approximately 90-100 psi per every 100'.

Nice lookin' rig. You might want to consider some more hose. Keep an eye on the brakes too. You'll do well with the setup! :)

After 2 weeks of kicking it around, I finally gave in and traded my baby in for a more 'mileage friendly' truck. I'll miss her, but not the $200/month in gas she was drinking. The new Lariat will help ease the pain......It's sweet!

Thanks Jeff! It's a beautiful truck and I've worked hard to earn it. Working half days won't pay for these toys! :lgmoneyey

I'm not too concerned about the seats. If I take care of them, they'll be fine. If not, I'll get a New Truck! :lgbugeyes :lgbonk:

My affinity for trucks did me in again yesterday. I woke up with the intentions of buying a new mower, but I came home with this.

They both work, but one is considerably cheaper than the other. Sodium hydroxide will definitely help with oil stains though. Otherwise, sodium hypochlorite will usually do the trick. A light coating after cleaning will help to brighten it a bit too.

These are basically like the pvc wands we've used in the past, just using larger tips and a 3/8" Q/C rather than a 1/4". http://www.thegrimescene.com/forums/attachment.php?attachmentid=3945&d=1144506152 1/2" hose is recommended with the gas-powered diaphragm pumps, hence the larger 3/8" fitting.

I'm not looking for an arguement here.....Simply stating what my experiences have been. With regard to the ball valve, it was on a pressure hose......Let's be clear and not twist it for your own benefit. But by the way, I'm tired of you following up some of my posts with your negative and resentful comments. I simply try to better what we do with better equipment. If you like it....great! If not, get busy.......My work speaks for itself and it will always be open to public ridicule, but we'll continue to do what we do and reap the rewards of our hard work. "Cowboy Up" and pick up the phone tomorrow so we can work this out. If not, I'll assume you'll continue to show your envy/jealousy. I'm tired of people calling, emailing, and pm'ing me to mention your negative nonsense that follows up some of my posts. The next commercial project we do will be an open door for you. I'll pay for your traveling/lodge expenses to and from Orlando if you're willing to do what we do and do it in a timely manner (which means within an hour of what we do). Let me know..........:)

Lance, You can reduce the fittings and plumbing at the tips and it's still heavier than it needs to be. Keep up the good work though!

Do tell! :lgwave:

I've done that one before too, but it seemed a little hard on the elbow due to the added weight. Kind've like tennis elbow. I've got more coming for those who do larger roofs and need more range at low psi. Good luck!

Welcome Doug! I started out as a detailer, but the knees couldn't take it anymore. :)

My helpers always ask why I point the lance off into oblivion when I pull the trigger, and that's exactly why.......:)