Peak Mobile Wash

Hope I am not to late to get a copy....peak_mobile_wash@yahoo.com Thanks

I was talking about QC nozzles, do they make those above 10?

thanks

Where is the best place to get low pressure nozzles? like 12.0-20.0. I don't see them on pressuretek and would like to find some to get my pressure way down for house and wood cleaning. Thanks

John, are they still there? I cannot find a phone number or website online. Do you have a number or website for them?

I really like this idea. My girlfriend used to work at a local daycare and has a good relationship with the owner, I am going to see if she will let me clean hers for free (after the snow melt). Then I am going to work on writing up a letter to send to daycare centers in my area. I will let everyone know how it goes. My thoughts were to wash with a light bleach and warm rinse with very low pressure and not to high a temp, those plastic playgrounds may melt or warp so be careful.

Thank you for all the advice everyone. I am going down to Jordan Pressure Washers in Denver to look at a machine and trailer today. If I do not get the trailer I am ordering one just like it with a 200 gallon tank. He has one skid machine built and in stock now that is 6 GPM, if the price is right I am going to get that one. If not he said that he will build me a 5.4-5.6 GPM unit that will be ready in 6 weeks. Thank you all for the great advice and steering me towards a machine that will work much better for me. Now my only problem will be a smaller tank but hopefully after a good year this year I will be able to upgrade my truck.

Thanks for all the great advice everyone. I am going to go with at least 5GPM for now. I did see a machine that pumps 5.2 I think that is the front runner.

My biggest sticking point on a 5GPM+ machine is the amount of water i will have to carry. I do not have a big truck and can only pull arund 4500 pounds so I cannot have a big water tank. I won't want a machine that is pumping 5+GPM and is going to suck my tank dry in a matter of minutes. If I had a truck that could carry big water none of this will be an issue but I have to work with what I've got and this truck is all I have currently.

I am sure some of you have seen my other thread looking for a compact trailer rig. Well heres my new question. What is the real difference between 4 and 5 GPM? I mostly do residential work now but would like to get into more commercial work (flatwork, store fronts, construction cleanup). I have my machine choices narrowed down but wanted some advice from the vets around here as to how much more I will really get done with an extra gallon per minute. I am ok with cleaning things a little slower at this point, just as long as I can still do a quality job, will this be possible with 4GPM? Thanks, Happy new year

Truck fleets and car washes when the weather permits. Next year I am thinking about buying a sprinkler blowout trailer for the fall. And a snowblower for the winter.

I have thought about building my own and believe that I could do it but seeing as this is my first rig I think it would be better to buy complete. I am sure that in the future when I have more experience and am not limited by, a smaller truck and limited storage.

got a quote from ACR products and a colorado hydrotekdealer. Where else should I be looking?

Thanks everyone, I am going to call hydrotek today

I am upgrading my equipment next month. I am looking at a small hot water trailer unit. I would like 4-5 gpm, 225 gallon water tank, chem tanks, hoses and reels, and storage would be nice. I need to have a single axle trailer under 8 feet wide and 12 ft long total (storage issues). I am getting pricing from Jordan, Delco and have been looking at a magnaterminator MagnaTerminator Mobile Cleaning Unit | Hot High Pressure Washer The terminator looks like the nicest unit as far as options and ease of usage but the machine does not seem the greatest. Anyone use one of these machines? What other options are out there for a rig similar to this? I want to spend somewhere in the $10k range and it would be nice to find a dealer in the western states so that I could pick the unit up and avoid huge shipping costs.