JustMe

I run a 8gpm with a 30" and you can move along rather quickly.. Faster than most probably like to move :)

I would wager to say mine shoots 30 feet without a doubt, however my shooter tips seem to hit a little further, however the chem ratio is nowhere near that of the m5 on the shooter tips. I was told by another pw'er that his old X-Jet does indeed shoot further.

Wow this sounds like a nightmare, sorry to hear about this problem..

I have been using my own percarb mix and it works good, I don't mix the SP with anything but a little soap and it cleans wood right up with even garden hose pressure and no visable damage or ill effects. I get my Sodium Percarb from a local chemical place.

2 lbs per 5 gals is what I use. Double vision?

2 lbs per 5 gals is what I have been using.

Thanks again! :)

Thanks guys that is most helpful, do you need to rinse it once it has brightened concrete or just leave it on. Ron

How do you guys normally use Ox, do you try and put it on after the surface has almost dried or when it is fairly wet? Do you do it the same for wood as you do concrete. The reason I ask is I had some tough rust stains to remove and when the surface was wet it would not touch them and I found that odd, but it was on a vertical surface.

No takers on a guess :dunno:

Have to remove the paint from the block so they can repaint it which seems to come off rather easy with just the wand, have not tried the turbo yet. Have to clean all of the prestressed around the windows. The building is about 150x130 and 30' high on the high side. I am figuring around 70 hrs due to the cutins around the windows and after doing a test section. Any insight would be appriciated, don't think I will loose my tail, but I may be low or high in my estimated time. http://frontiernet.net/~hostileone/pw/commcntr/

Thanks, do you know the weight to measurement, how much by measurement equals the weight?

Two questions I guess First can someone tell me the the weight to measurement for Oxalic like 1oz=1/4 cup Second does anyone see any issues with storing Oxalic, Sodium Percarbonate, and Sodium Hydroxide in 5 gallon plastic pales inside my enclosed trailer, the buckets have a rubber o-ring type seal in the lid lip. I know the percarb and ox comes in bags and I was wondering if there was a reason for that or if the heat would cause any problems.

Hey Jon that looks nice, do you have anymore information about this product.

I asked if they had any intention of having it sealed and they said no as the surface would most likely be slippery than snot :)