Alta

Great Thread, I bookmarked this one.

Well said, Matt

Thanks MMI,

The log railings are not being done. No access to water. need to remove flaking transparent in spots were they applied to much and it failed, then clean dry. Apply semi solid or solid to get the best look possible over wood that can not be cleaned and brightned in the coventional way. Thankyou for your reccomendations

80 units in a condo complex. 6000ft elevation Park City Utah @500 sq ft horizontal surface per unit, no railings Alot of steps, i am breaking down to 2' times width of step to figure sqft. No water access, spot sand to remove failing stain, sweep and blow of dirt and dust Transparent oil stain on decks now, Hoa wants to go to either semi, or solid Semi , sw woodscapes Solid, flood pro, or woodscapes Other suggestions Areas with direct sun exposure have very little stain, will take 2 coats Would 1 coat give adequate coverage on areas with intact stain?, to reduce overall costs I would prefer to bid job with 2 coats on everything I am thinkint $1.50 - 2.00 Thank You For you help, Mike

I am thinking $1.50 - 2.00 a sqft

80 units in a condo complex. 6000ft elevation Park City Utah @500 sq ft horizontal surface per unit, no railings Alot of steps, i am breaking down to 2' times width of step to figure sqft. No water access, spot sand to remove failing stain, sweep and blow of dirt and dust Transparent oil stain on decks now, Hoa wants to go to either semi, or solid Semi , sw woodscapes Solid, flood pro, or woodscapes Other suggestions Areas with direct sun exposure have very little stain, will take 2 coats Would 1 coat give adequate coverage on areas with intact stain?, to reduce overall costs I would prefer to bid job with 2 coats on everything Thank You For you help, Mike