CritesExteriors

Ryan, Starting to get my roof cleaning setup together.... how much soap or what proportion ... and what type of soap to do add to your chlorine roof mix. Also, do you have a part number for the extendable spray wand you ordered from Water Cannon? I plan on making a wand for walkable roofs, but the one you are using with a squeeze handle looks good for use on a ladder. Thanks!

Can you reply with a phone number or email it to me? Thanks! critesexteriors@bellsouth.net

Ryan, ALCHEM in Atlanta has 55 gal drum @ $1.50/gal. 404-696-9202 Nothing found in smaller quantities yet.

Hey Squirtgun, can you email me this guys info.... I have someone I know that goes to Tifton every now and then that could drop by. Thanks! Hey Ryan, found Peach State Cleaners in Atlanta that will sell it for $6.25/gal. Still researching other places. Jim Crites CritesExteriors, LLC LaGrange, Ga. critesexteriors@bellsouth.net

Ok, i didn't get any response to that..... does anyone know a place outside of Georgia?

If anyone in Georgia has a company that sells the cheap liquid 12% S/H, please email me. Thanks! critesexteriors@bellsouth.net

She said it was per gallon. Probably just didn't want to order it..... I called Ace and they did not have any.... small town..... will call other Ace in larger town.

I'm in Georgia and called a local pool supply companyand asked if they had liquid pool chlorine. They could order it at 12.95 a gallon! Can any one direct me to a vendor where I can get it for the $1 a gallon I've read on this board?

What does it do to windows and screens herbie1? Do you spray Silowet on then rinse windows?

Are you applying with an x-jet? Right now I only have a 2.5 gpm 2500 psi pw, would I have to change the mix ratio with my x-jet? Also, the window reference was for the Sil-o-wet. Have you ever used it?

What is the mix ratio for the Citracleen? Do you dilute it? Do you add anything else to it? Does it tackle mold and mildew like chlorine? It looks less harmful than chlorine which is a big plus. And with the Sil-o-wet... what does it do to windows and screens when it dries?

2500 psi & 2.5 gpm

I have an Ex-cell XR2500 that I would like to still use for basic house washing. Will I be able to use an x-jet and extension wands with this model and still do a good job? I know its an average pw, but like to use it if I could. Or should I just try to sell it?

Just want to thank all the hard working PW's on this board. The knowledge on this board is outstanding. I have learned so much and have had you guys scare the crap out of me. Let me explain..... Like most people, I have misunderstood what it takes to do a proper PW job. I have very little experience and that has been with my own home as well as my rentals. When you are doing your own houses you don't really fear messing up. But in reading the posts... I know I could mess someone’s house up bad if I don't take the time to understand what I am using and how to use it. For the most part, I have only used bleach, and make sure that I rinse well. I never knew how to add things like dish soap to increase hang time, or adding other things to emulsify. I have been working in computers for 20 years.... and I'm looking for another line of business. Started a business here recently to clean homes and drive ways. Mostly on the weekends.... please no one hate me for being a weekend warrior. Also starting the business for my two sons, 18 and 12. They are 120% outside workers and players and have stated hundreds of times that they will not work an office job (like me). So I thought that I could start this for them. Being a computer nerd... I started educating myself though the internet and found this web site. Thank goodness I did. Did my first job the other day and it worked out well. But took me a long time and I got soaked to the bone. With basic equipment, no x-jet or extender wands, it was no wonder. Looking now into an x-jet or m5. I also have an understanding of what you guys go through, so my pledge to all is to keep my pricing in the same range and try to win jobs by my performance on other houses. Sorry for the long post…. And thank all of you again. p.s. I think it was Paul that stated in one of his other posts how wrong people are for thinking this is easy work. He was right, it’s not, but I did enjoy working for myself.

I went ahead and became a contractor/distributor with them. Cost me $2800, but it all went to product. If it takes off, especially with the warrenty claims, it could really be good business. Vincent is setting up a basic price of .60 per square ft. and .50 cents per mile travel for warrenty claims. If the vinyl companies come on board, then any claim that is in your area, my area is 9 counties, approx. 500,000 population area, will go to me only. I will do the job and invoice the vinyl company. If customers like this method to satisfy the warrenty claim, it will save the vinyl company tons of money. Also, if someone orders over the internet that is in your area, you make money too. If this doesn't take off... well I have enough rental homes to put it on and protect my investment and other rental owners that I could make my money back or some of it. The out of the pocket money is an issue, but I consider it almost the same as investing into getting your house painted. Just have to see how it goes. Like when I started pressure washing.