seymore

Here is what i use from Padco that holds up pretty.

Here ya go Shurline / EZ Painter

It might have a clear on it already by the looks of it? Most of the play sets i've seen haver a sealer on them. Did you test it with water? If it does call the maker of the play set and find out what sealer is on it so you won't have to strip it to maintain it.

Now that's a cool arbor! :cool: The cleaning part is the easiest it's gong to be the staining that's gonna suck lots of detailed work! Your deckster will reach that high with a cone tip for cleaning.You can always x-jet or downstream whichever you wanna use?? Is that redwood shingles too? They don't want you to restore those too?

NIce job Mr.Petry! :cool:

Nice job Yaz :cool: Is the wood that black like in the pics or it just me?

PINE SAP nature of the beast can't have one without the other.

You can put whatever battery you want.

Hmmmm i wanna say Tractor supply/hardware store but it's been a while since i bought some....i'll get back to you on that one

here is what i use

Well you just learn to spray in the oposite direction of the wind.What wand are you using to spray how long is it?

Stay clean what's that my? tan in the summer is Cedar Gold one week then Cedar dark another week.I wear shorts and t-shirt mostly.I only wear a mask when spraying an arbor not outdoors in the open.

Yeah i know what you mean it's a vine pull em out they gonna grow back in no time just add water! That deck floor looks blotchy or is it just me? Was it jsut grey before cleaning no old stain? You just need to spray the first coat light and even then the second coat med. to heavy as needed in dryer areas.The wood is gonna soak up the first coats pretty good.The deck should look rich and even from the oil it may take more than 2 coats especially on the deck floor.Cover all them friggin plants and you're good to go and spray.

So you are staining the deck and not the lattice?? That's gonna stand out like a sore thumb! Why would you spray it?? being it's so small just brush it in or paint pad it..it's gonna take you longer to cover the house w/ plastic. You just brush 2 coats or 3 till the wood looks rich.

Can i forward my phone to someone so it stops ringing? :lglolly: Hope Biz picks up for you Mike and you too Dan.

Larry so that was you in my back pasture wiping out my crop! :lgwave: :lglolly:

Are some still trying to give Mr.Ed more angry customers??? :lgangry: :lgwave: I think the fungus are among us !

hmmm interesting :lglolly:

Sorry i was waiting on some clips with my stain order but the shipment is now due Mon-Tues.I'll get them out as soon it comes in.

That's why the Gray Away is made with extra mildewcide for us since Houston is so humid tropical.:cool:

When i'm done spraying the inside of the arbors i remove the top keep the sides on and walk the top spraying down.

Ed Burke :bullistic:stupid::bullistic

I think it's airborne crap falling from the trees or from pollution. :lgwave: You try Oxalic? I've seen this before and i have a pic somewhere i think it's on another computer when i find it i'll post it.

I'll usually strip rinse then bleach then rinse reall good then use oxalic.The stripper will work faster than bleach and times bleach is not needed but it all depends on what the wood looks like.

Friggin propietary HP :angryfire That's why i build my on pc caue the factory computers/electronics are built so you have more headaches trying to repair them