dave

I have to quote my first paint removal job it is a brick wall which use to be inside the house before renovations it has interior paint on it i have a 3000psi 4 gallon machine would a turbo rotomax with heat do the job or would i need to sand blast or use stripper thanks for any help.

a realize its not possible to duplicate from an msds but you may find a product that is based with the same major chemical given that this product has 70% of one product listed and four others listed its a pretty good start.

i'm not sure if they supply in the usa but i can give you the msds and you may be able to talk to your chemical guys and try to match it drop me an email if your interested. grimecontrol@yahoo.com.au

thanks guys, i took the job on a hourly rate only i got a sample chemical from a graffiti specialist this stuff will knock your socks off painted it on 2 min dwell and wash it off the paint just melted.

soak the ivy roots in straight bleach i used 12.5% soaked the roots using a paint brush keep wet for 30 to 45 min roots should be soft and mushy and pressure wash off.

I am looking at purchasing The H2O Boy unit has anybody used this system or similer systems i have a vacuboom recovery unit i just want to reuse my water they say it filters to 5 microns any advice would be apreciated thanks.

thanks Alan i haven't started yet just trying to get my trailer set up, fleets and flat work for now. i was planning on recovery and discharge but due to all the headaches the sewage authorities are giving me i'm now looking into reusing my water to reduce my discharge.

to russell cissell or anyone else who can help i'm trying to find a product like hd-80 for stripping decks im from australia most of the strippers ive found so far are methleyne chloride based and very expensive one product i tried had 25% sodium hydroxide it cleaned well but did not strip off the old seal how much sodium hydroxide % should i be looking for or do you have any Distributors over here.? thanks for any help regards dave.

what is the best way to apply these wet seals and do they require two coats?