dave
-
Content count
53 -
Joined
-
Last visited
Posts posted by dave
-
-
i'm not sure if they supply in the usa but i can give you the msds and you may be able to talk to your chemical guys and try to match it drop me an email if your interested. grimecontrol@yahoo.com.au
-
thanks guys, i took the job on a hourly rate only i got a sample chemical from a graffiti specialist this stuff will knock your socks off painted it on 2 min dwell and wash it off the paint just melted.
-
soak the ivy roots in straight bleach i used 12.5% soaked the roots using a paint brush keep wet for 30 to 45 min roots should be soft and mushy and pressure wash off.
-
I have to quote my first paint removal job it is a brick wall which use to be inside the house before renovations it has interior paint on it i have a 3000psi 4 gallon machine would a turbo rotomax with heat do the job or would i need to sand blast or use stripper thanks for any help.
-
thanks Alan i haven't started yet just trying to get my trailer set up, fleets and flat work for now. i was planning on recovery and discharge but due to all the headaches the sewage authorities are giving me i'm now looking into reusing my water to reduce my discharge.
-
I am looking at purchasing The H2O Boy unit has anybody used this system or similer systems i have a vacuboom recovery unit i just want to reuse my water they say it filters to 5 microns any advice would be apreciated thanks.
-
to russell cissell or anyone else who can help i'm trying to find a product like hd-80 for stripping decks im from australia most of the strippers ive found so far are methleyne chloride based and very expensive one product i tried had 25% sodium hydroxide it cleaned well but did not strip off the old seal how much sodium hydroxide % should i be looking for or do you have any Distributors over here.? thanks for any help regards dave.
-
what is the best way to apply these wet seals and do they require two coats?
Newbie Question
in Residential Pressure Washing
Posted · Report reply
a realize its not possible to duplicate from an msds but you may find a product that is based with the same major chemical given that this product has 70% of one product listed and four others listed its a pretty good start.