![](https://secure.gravatar.com/avatar/09d50357d897f7dc2fde459df64fea14?d=https://community.thegrimescene.com/uploads/monthly_2017_11/D_member_4094.png)
dray5mil
-
Content count
12 -
Joined
-
Last visited
Posts posted by dray5mil
-
-
Hi all,
One of my pressure washers builds up pressure in the hose when the trigger isn't being pulled. I'm thinking it's the unloader or the outlet . Any advice is greatly appreciated.
-
Hi all,
I recently purchased a new machine that is setup for downstreaming. The ratio on the injector is 7:1. I normally use outdoor bleach which i've been told is 7% sh. Should 7:1 be strong enough using outdoor bleach to kill mold, mildew etc.? Asking this because i'm having to go back and spray some by hand to do a good job. I haven't tested what the actual ratio is. I'll be doing that today. Maybe I'm not letting the chem dwell long enough. (my mix in a 5 gal bucket is 3 gal outdoor bleach and 1 gal simple green.)
Thanks for any input.
-
I don't use anything..............I try to keep the drains chem free. If there was heavy algae, mold or mildew i'll do a lite bleach spray same as Adrian.
-
Hey all,
I got a quote today from Nationwide through Netquote. $600,000 limit with a $300,000 max per claim for about $1300 for 12 months. Seems high. I greatly appreciate any suggestions.
-
I got a quote today from Nationwide. $600,000 limit with a $300,000 max per claim for about $1300 for 12 months. Seems high. Any suggestions out there ?
-
not alot of stucco in this area thats for sure
-
Sweet ! What was your chemical of choice ?
Cleaning metal building
in Residential Pressure Washing
Posted · Report reply
Hi all! Im looking for a good mildew, algae killers that works well on painted metal. Is bleach ok? I tried it on a small area but dowsnt seem to work as well as on vynyl.