Shawn F.

Yeah if I had more money I would opt for an 8 gpm heated unit. ;) That can happen later down the road and this will have to work for now to get me started.

Thanks for all the information and help today Russ! I will be ordering my new pressure washer unit from Russ in the next week or so for sure. Great customer service and a nice guy! Too bad he isn't located in NC. :) BTW, I have decided to go with a Pressure Pro cold belt drive unit with 5.5 gpm and 3500 psi. Vanguard 18HP motor, General pump. Seems like that is all I will need since I am only doing residential work and most likely will not need 4000 psi and heat anytime soon. When it's time to step up I will go with a bigger heated skid unit and use this one for a backup.

Neil, I am in the same boat as you. I tried getting a quote from a local place here months ago and still have not heard anything. I called 6 times, nicely, and still no service. Your best bet in my opinion is Pressure Tek and then contact Russ on here about a pressure washer. That is what I am going to do. I get my chemicals and materials from Pressure Tek and will most likely be buying my washer unit from Russ. Good luck with your purchase!

Yes unfortunately they are not getting back to me because a few of the guys there are very nice and know what they are doing. I tried 6 times to get a price quote from them. The first 3 times I just figured they are busy and forgot because the guy who was supposed to get back to me was out of the office a lot for family and stuff. After the 6th try I just gave up... Russ, I will contact you on Monday about a cold washer unit. Thanks.

Bringing this thread back up again... Any recommendation on which cold unit in the 6 GPM range would be best? Vangaurd motor, Honda, etc? I cannot get my local pressure washing company to contact me back with a quote (it's been 2 months) so I am giving up on them now. I've called several times very nicely and they keep promising to get back to me on a quote but no luck at all so I'm done trying with them. Looks like Russ is going to most likely be the one getting my business.

Neil, yes I did see yours. Currently I use a Honda 13HP 4.0 GPM unit (cold) and it works ok. I'd like to go to a 5 GPM cold belt drive unit or similar. The skid units are huge but I have plenty of trucks and a trailer to haul it. My main goal by next year is to have a flatbed truck or even a NPR Isuzu with everything mounted on it and under bed tool boxes for my window cleaning stuff. That way I do not have a trailer to haul around and I can use the flatbed specifically for work only and drive my El Camino for estimates and what not... I'd love a van but it's just not going to happen. They are nice for security, space and act as a billboard but it wont work for me. An NPR box truck would be nice but not sure I want that beast sitting in my driveway with my 5 other cars (hot rods). If I had the space for a NPR box truck with the 4 banger turbo motor then that would be the way to go. My friend has one and is getting 12 MPG with it loaded down heavily for plumbing and can fit a TON of stuff in it. It's a HUGE running billboard too and the cab is separate from the box so no fume smells.

Do you guys think that I can get by with a nice belt drive type cold washer unit starting out doing just siding and gutters and later down the road buy a heated skid unit and use this belt drive for backup? I am trying to figure out what to do here and do not plan to do driveways or any commercial work this year until I master siding and gutters along with my window cleaning. Thanks for any info!

Paint thinner possibly?

Thanks for the info and advice guys! I will just buy new as mentioned here. As for the roundtable, I was going to make plans to make it but I am in the middle of moving right now and it just can't/wont happen unfortunately. I will give Russ a call here sometime in the next few days. I have been putting it off trying to give my local shop a chance but I've tried 4 times with them with no call or email back on a price on their Landa or HydroTek unit. :( They have now lost my business for good unfortunately.

Only thing is that it's not rust. It looks like it though but it's not. Think the F8 will work anyways?

I will look into Iron Out, thanks a lot... Any other suggestions, feel free to post them!

I also found this one as well which looks to be a bit better of a pressure washer since it's a Landa... pressure washer hot

I began pressure washing my parents home today but ran into 2 problems. One being my new Hi/Low Pressure Nozzle only stays on high and the other is a stain along the bottom of the entire house that doesn't seem to come off. I used a mixture of 4.5 gallons of Clorox Outdoor bleach, 16 oz of Simple Cherry and 8 oz of F13 Gutter Grenade. I let this mixture sit for 5 minutes, scrubbed with a brush and no luck... Any ideas what needs to be done here to remove this? It's along pretty much the entire bottom of the home and it has never been pressure washed (house is about 13 years old or more). Thanks a lot in advance!

Well guys I'm still on the hunt for a pressure washer and came across this one: SKID MOUNT PRESSURE WASHER I am hoping to get some opinions on this type and what you think on the price and amount of hours. My 3200 PSI 4 GPM Honda pressure washer is on it's way out very soon and I need to get something quick. If I cannot find anything local within the next 2 weeks then I will be giving Russ a call on one. I was going to go with an 8 GPM unit but just cannot afford it right now and I think for residential work (mostly just siding, gutters, small roofs and small walkways) than a 5.5 GPM unit will do fine for now. I'd greatly appreciate anymore help.

Yeah it was kind of crazy. I asked about a truck and/or van. They said neither. What all is involved to put commercial tags on a truck? Guess I need to figure out some other company to purchase from. I just cant see why they cannot give me the MSDS sheets like everything else and go on my way as long as it's strapped down in my truck, El Camino or van... Oh well, it's their rules, nothing I can do. Guess I'm stuck with household bleach.