-
Content count
125 -
Joined
-
Last visited
Posts posted by glock40
-
-
Beth thanks that is what I needed to get going. I know by reading that thread I can get the basics of learning. I thank you very much for helping me and others. Look forward to keeping in touch with all the members on this forum
-
gotcha roger I was just looking for a post on just a generic step by step. Mybe if anyone has any info as to stripping. Thanks again to all in the forum
-
I have been searching for a thread on a step by step process for powerwashing , stripping, and staining patio decks. Does anyone have this thread stroed on a file or have a link to send me. Thanks to all
-
thanks everett Hey can I take you up on that offer? How about a step by step thread on deck stripping and staining?
-
Thanks to everybody for helping me I cant say thank you enough I want to learn and become vets like you all. I hope I didnt not offend anyone by being a newbie and trying to start a biz. If anyone sees the thread on deck stripping step by step please forward it to me I tried to find it in the wood restoration forum area.
Also looking to purchase the chemicals from a good dealer anyone know where to buy it wholesale.
-
Thanks for the reply guys, every word helps I may have posted the questions wrong. I dont use a full 3200 psi on the deck I just wanted to share what type of unit I use. I normally use for a cleaner zep. But for some reason it still will not remove the wethered look. Sorry about the bad post guys and thanks again always
-
Hey all ,
Since I have been powerwashing and staining decks I have noticed that when i powerwash a deck . I get that weathered look out of it and the natural color comes back. After washing it I notice that the pressure washer does not get all of the weatered look out. So what I am trying to say is it has some gray on it still.
What am I doing wrong is it that im not hitting it with the washer enough? I am using a 3200 psi honda washer with a 30% tip. Also I apply the stain in the areas of the rails and spindles and i get blotty spots can anyone help with this as well. Everything I do is by hand and brush. I would love to cut my time in half any suggestions with power equipment?
THANKS GUYS
-
Ryan sorry for getting back so late I sealed the deal for the deck its a wood patio floor not concrete.Total feet is 2360 how do you recommend that this job get stone to apply the stain? what type of stain are you using I let the customer go pick out their own material. They ussually use behr from home chepo. I want to start buying my own product and marking it up what do you recommend for decks. Oh by the way ryan no rails or spindals on this deck 2400 cash. Is that reasonable?
-
Hey guys looking for a extension wand used in good shape or if anyone knows were is can get a new ext wand 24 ft for a good deal. Also looking for a gutter cleaner wand. Let me know. hucableguy@sbcglobal.net
-
Hahahaha like the last paragraph Ryan. Always thinking about how to make a buck. I sure will give you a call this saturday you on eastern time or another zone?
-
Ryan thanks for the reply so fast. This is very good to know. Hey ryan have you seen any good dvd videos that show some residential pressurewashing. the how too's?
-
Hello all I was asked to look at a job for a house thats probably a million bucks. Well you know after looking at the rear patio floor I was asked to powerwash it and put a stain on it. This deck is estimated to be about 24 feet wide by 120 feet long. If i did it by hand it would take foreever. I normally do everything by hand but I cant for this patio floor. Anyone have any ideas as to any power equipment to use ?
-
xjet is the solution , but what type of fan am i useing on this house. i run a 3200 psi honda powerwasher. ?
-
Sorry for getting back so late. Im not to sure if its painted vynle or just baked on from the warehouse. Tell me both ways to approach this.
Thank to all
-
Hey question for the guys out their. I was offered a residential powerwash job on a 2200 square foot house. Light color vinyle siding. what type of fan is recomended for this job. I dont want to peel the pain of the vinyle.
i could use some good advice on this one guys. Email me at hucableguy@sbcglobal.net
Thanks to all that help
deck brightener
in Wood Cleaning & Restoration - Decks, Fences, etc.
Posted · Report reply
Hello to all just received my f-18 cleaner and going to apply it tommorow. But I need a brightener can anyone recommend one that they use from a local paint supply or chain store. I wanted to buy from pressure tech but forgot to order it.