cwenbass

I have a craftman 4000 psi PW. I started it, it ran then died out. I did the same thing. Then I realized I forgot to tunr the hose on,. I turned the hose on, now the pressure is much lower. Anyy ideas? ' Thanks, Chris

Planning on doing a few family homes. I have some simple cherry and a problem finding 12.5% SH. Using an xjet and a bucket. Does 3 gallons 6% 2 cups of simple cherry and 3 gallons water sound good? Should I try finding 12.5, add another gallon of 6%?

Anyone give me an idea on cost for LLC and insurance?

I am very small potatoes and that is fine by me. I started a few years ago. First year I paid off all my equipment. Last year, made a few $$$ before shoulder surgery cut my season short. This year will be my first full season on the job. I only want to do vinyl houses and make a few thousand $$ for the year. If I made $6000 that would be an amazing year for me. I teach full-time and coach football in the fall. I like powerwashing. It's a great spring job. All that being said, is insurtance and an LLC a great idea for someone in my shoes? I am not out there blowing siding off of houses. I am very careful about what i am doing and the products I use. Any suggestions? Thanks, Chris

Cam I apply wood brightener just to clean the deck? I don;t need to strip it, just want it cleaner. Was also wondering if my housewash blend will do the job. 2 gall. 6% bleach 1/2 gallon of housewash (powerhouse) and 2.5 gal. of water Thanks

I have no intention of putting anything on wood until I know a lot about it. That is why i am asking. Saw a PW company that advertised that they did it. Do not remember the sight. I come here so I can see what others are doing because those in the industry doing are what set industry standards that I try to adhere to.

I do not. i know I use a stripping material then a brightener. I amnot sure where to gather all of that information and would love to know more about chemical process involved in washing. i have only done a few decks for friends with stripper/brightner at low PSI so no harm done but I want to know more before I start doing it for $$.

Does such a product exist as a stripping agent and brightener in one. Also, if I wanted to save money, does anyone use their own concoctions for stripping and brightening decks?

Thank you Beth N Rod

Most folks around here want biodegradable chemicals. I was using powerhouse and it worked well but the cost was high. Any recommendations for good biodegradable chemical used for vinyl?

I am doing two last jobs before I close shop this year (doing this part-time only). I am out of wash so I will use 6% bleach with x-jet and no proportion. Was planning on using 2 gallons of bleach, 3 gallons of water, cup of dawn. Does this sound right? It is a stucco house with some dirt and I am also doing a vinyl fence. Also, how do I add a signature? Thanks

Do you fellas/ladies clean aluminum siding the same way you do vinyl siding? Thanks

I got a call to do a house and owner wants the roof done too. I havent done one and did not want to, but I'll give it a go on a few friends houses first. Few questions. 1. Should I be using 12% bleach or should I use a cleaner? 2. If I am using an x jet, should I add water? What proportion should I use? 3. Any added risks to the surrounding areas I should be concerned with? 4. Should I do the house first then the roof or vice versa? 5. I was planning on just using bleach/water with the x-jet then a duel lance wand with 25 degree tip to clean it off. Does that sound right? 6. How long of a dwell time should it have? 7. Where do I go to add a signature on this sight? Thanks. Any other tpe would be great.

Any tips on washing houses on really hot days. I am concerned with dwell time and the cleaner/wash drying on the house. Thanks

Do you guys use surface cleaners for decks or will they mess the deck up or leave marks when it is time for staining or sealing? Thanks