Jump to content

Kbstrat

Members
  • Content count

    5
  • Joined

  • Last visited

About Kbstrat

  • Rank
    TGS Newbie
  • Birthday 09/05/1970

Profile Information

  • Company Name
    Inshore Pressure Washing
  • First & Last Name
    Kevin Bushman
  • City & State
    Port Orange, fl
  • Occupation
    Manager
  1. Live Oak Acorn Stains on concrete

    SH did the trick. Normally I apply SH on a driveway then use the surface cleaner. I have read post where people surface clean first then apply the SH. Is that the better way?
  2. What is the best way to remove Live Oak tree acorn stains? See attached picture. Thanks
  3. Emulsifier Plus

    I've been using Power House or Simple Cherry for House Washing and really like both. I thought I would give Emulsifier Plus a try because it comes in powder form and thought shipping could be allot cheaper. I bought the 5 gallon pack and want to just mix enough for one job at a time. Does anyone know how many ounces I would need for a gallon of mix? I usually use up to a gallon of Power house depending how dirty the house is + 2 1/2 gallons of 10.5 sh + 1 1/2 gallons of water. Another question: With the Power House mix I listed above, I have been adding 8 ounces of simple cherry because I thought it would help with rinse. Am I just wasting chemical or is the simple cherry going to help when rinsing. thanks
  4. Adams Adjustable Acid Injector

    I put the name of my business and where I'm located in the signature section. Is that what I needed to do?
  5. I have been using an x-jet for house washing. I do mainly small residential houses so the x-jet works good for me. I have a bigger job coming up and would like to down stream to save time and my back carrying that bucket. I bought an Adams acid injector awhile back and want to use it. I have a 3500 psi 4 gpm pressure washer. I was looking at the specs on the Adams injector and it says 3000 psi. Can I still use it with my 3500 psi? Also to apply chemical on the lower areas I will use a 2540 nozzle and for the higher areas I will use a 0040 nozzle. Is this the right set up for the psi and gpm of my machine? This is my first post so not sure if I have a signature or need to have it to post. thanks
×