![](https://secure.gravatar.com/avatar/2f2d8b41ca508509228f93957ffcf081?d=https://community.thegrimescene.com/uploads/monthly_2020_03/H_member_9358.png)
Hndyman55
-
Content count
7 -
Joined
-
Last visited
-
Days Won
6
Posts posted by Hndyman55
-
-
I believe that’s where I ordered it from. Waiting on it to arrive.
-
Thank you. I did go ahead and order a new injector. Will see if it makes a difference.
Beth n Rod reacted to this -
the method for metering on this machine is a replaceable orfice on the beginning of the line. There are no clogs or kinks in the new hose
Beth n Rod reacted to this -
Yes I took it apart. And made sure it was clean inside. And yes it went ball, spring, then barbed fitting. Not adjustable. I can blow into it and the ball pushes free. When I suck the ball seats and seals. It’s like the Venturi effect isn’t happening when put on low pressure
Beth n Rod reacted to this -
Yes the spring is still in it. Any reason why I could never get suction even when adjusting the flow to low pressure?
-
Hello all. First time poster. I have a pressurized cleaner with a downstream injector. I noticed it’s not sucking. I tried to free the ball with a nail but when I did the water squirted out instead of sucking in
Beth n Rod reacted to this
Downstream nozzle has pressure?
in Tools, Equipment & Basic Maintenance
Posted · Report reply
So got the new injector installed and it works great! So I looked at the old injector and somehow the screw in orfice? was missing. I didn’t realize it when I took it apart because I’ve never had one before. Thank you for the help