Alta 14 Report post Posted April 27, 2008 80 units in a condo complex. 6000ft elevation Park City Utah @500 sq ft horizontal surface per unit, no railings Alot of steps, i am breaking down to 2' times width of step to figure sqft. No water access, spot sand to remove failing stain, sweep and blow of dirt and dust Transparent oil stain on decks now, Hoa wants to go to either semi, or solid Semi , sw woodscapes Solid, flood pro, or woodscapes Other suggestions Areas with direct sun exposure have very little stain, will take 2 coats Would 1 coat give adequate coverage on areas with intact stain?, to reduce overall costs I would prefer to bid job with 2 coats on everything Thank You For you help, Mike Share this post Link to post Share on other sites
0 Alta 14 Report post Posted April 28, 2008 I am thinking $1.50 - 2.00 a sqft Share this post Link to post Share on other sites
80 units in a condo complex. 6000ft elevation Park City Utah
@500 sq ft horizontal surface per unit, no railings
Alot of steps, i am breaking down to 2' times width of step to figure sqft.
No water access, spot sand to remove failing stain, sweep and blow of dirt and dust
Transparent oil stain on decks now, Hoa wants to go to either semi, or solid
Semi , sw woodscapes
Solid, flood pro, or woodscapes
Other suggestions
Areas with direct sun exposure have very little stain, will take 2 coats
Would 1 coat give adequate coverage on areas with intact stain?, to reduce overall costs
I would prefer to bid job with 2 coats on everything
Thank You For you help, Mike
Share this post
Link to post
Share on other sites