brian_p 14 Report post Posted July 16, 2009 Hey everyone. I just picked up a used pressure washer off of craigslist. It is a 18hp Briggs, horizontally opposed 2cyl. It has a gear reduction and a General T9281 4000psi 4gpm pump. This seems extremely overkill to run this pump. I had a 4-4000 landa belt drive before running a gx390 13hp honda. I've got a Landa hot water trailer 16hp vanguard running a ts2021 5.6 gpm 3000psi and a 120v generator. Seems to me that it would be better running a larger gpm pump instead of this one. Any idea what they were thinking when they put this together? It only cost me $50 The previous owner said that there was something wrong with the pump, he has no idea what. I've been on a bit of a hot streak with deals, the Hot water rig only cost me $100 and it only needed an unloader and a couple ball valves, so for $50 I figured I can't go wrong. Share this post Link to post Share on other sites
offduty 25 Report post Posted July 16, 2009 Lotsa overkill. I would put on a udor 7.9 gpm pump if it wasn't for the gear reduction. Lot of headaches there. Share this post Link to post Share on other sites
