geezer 14 Report post Posted August 17, 2009 O.K. I got a Liberty gas series hot water pressure washer (skid). Unfortunately the place I purchased and where it was made are no longer in business. I was wondering where to purchase a new gas fuel tank for it. The one I have now shows some rust on the inside of the tank. I would really rather replace it before it gets any worse and starts to create problems in the future. Obviously the fuel oil tank for the burner is o.k. I am not sure of the measurements but I will check tomorrow. Share this post Link to post Share on other sites
offduty 25 Report post Posted August 17, 2009 I have one of these for each machine. Gives about a 9 hour run time, or almost a full day. You can "T" them and they will supply two machines if needed. Overton's is a local store for me, don't know if they have one where you live. I am sure a marine boating store would carry them. Overton's® > Moeller Portable Plastic 12-Gallon Fuel Tank Share this post Link to post Share on other sites
zhamilton89 14 Report post Posted August 17, 2009 +1 on the marine fuel tanks, they are what you should look for, made for exactly that application. I want to get a large one and mount it to feed all the engines but im not sure about the routing and pressure to the engines. Share this post Link to post Share on other sites
TNRoofCleaner 16 Report post Posted August 17, 2009 You can also recoat the inside of the tank. Just go to a motorcycle shop and get the cleaner and coating from them. Share this post Link to post Share on other sites
