Chazz 14 Report post Posted March 21, 2012 A guy on my block just had his whole yard done In Pavers and there is a lot of dust. Can new Pavers be power washed? I don't think it's a good idea to use a surface cleaner right? Can chemicals be used? Share this post Link to post Share on other sites
0 LyonsPressureWash 14 Report post Posted March 21, 2012 If it's dust, why not just let the rain take care of it? But yes they can be washed. Use very low pressure so you don't wash the sand mix out of the cracks. I wouldn't use a surface cleaner if they're new and no need for chemicals. Share this post Link to post Share on other sites
0 mick m 19 Report post Posted March 21, 2012 Sorry man, beg to differ. If you want to wash th ''dust'' off you'll have to use a s/c otherwise you will leave lines all over them from using a lance. Drop your pressure down & just take your time, bearing in mind that it will take a lot longer to clean at the lower pressure.You could use a very mild detergent. It will all help to lift the dust off the pavers. If thier going to be sealed, they'll have to be pressure cleaned anyway. Share this post Link to post Share on other sites
0 bigchaz 157 Report post Posted March 21, 2012 Depends what kind of joint sand was used. If it was polymeric you might be seeing poly glaze if they didn't sweep off well enough. And if you use a sc and its regular sand you will need to resand them all Sent from my DROID BIONIC using Tapatalk Share this post Link to post Share on other sites
0 Chazz 14 Report post Posted March 21, 2012 Ok thank you Share this post Link to post Share on other sites
A guy on my block just had his whole yard done In Pavers and there is a lot of dust.
Can new Pavers be power washed? I don't think it's a good idea to use a surface cleaner right?
Can chemicals be used?
Share this post
Link to post
Share on other sites