Joshua Worsley 2 Report post Posted April 24, 2015 (edited) Hello gents. Does anyone have any insight on how Softwash works? Not the Softwash system. I'm curious to know if it's just using the jrod 4way and a good chemical, or do you lower the pressure on your pump/unloader as well. Anyone? Edited April 24, 2015 by Joshua Worsley 1 Joshua Worsley reacted to this Share this post Link to post Share on other sites
robertmurray76 0 Report post Posted April 25, 2015 I have a 4000 4 gpm washer and I "soft wash" with it. The only thing I did was put a soap shooter tip on the wand. I bought mind from pressure works. I use SH and a product called brown stuff, 2 gal sh,2 gal water, 1 gal brown with a down stream injector. The 5 gallon mix will do about a 2400sqft 2 story home. Share this post Link to post Share on other sites
Joshua Worsley 2 Report post Posted April 25, 2015 Thanks Robert, I'll look into that chem mix. I'm new to the industy. This site has helped me tremendously. Share this post Link to post Share on other sites
