RCBill 14 Report post Posted June 18, 2005 Greetings from the Cape Fear, I just about have my SureFlo Pump System ready to earn some money. All I need now is a pump primer and battery connectors. So I ask you, will the marine gas bulb primer work? Also, I would like to use the large aligator clips for easy connection to the battery. But I can't think of a retailer that may sell them. Any suggestions. BL Share this post Link to post Share on other sites
tropical wave 22 Report post Posted June 18, 2005 I dont do roofs, so I dont prime, but the battery clips are easy, any auto parts store, most department stores, heck, even radio shack will have them..... Share this post Link to post Share on other sites
beyoungsr 14 Report post Posted June 19, 2005 You should not have to prime a SHURFLO. You might run in to problems if you didn't purchase a pump with enough lift. Ditto on the aligator clips. Share this post Link to post Share on other sites
RyanH 14 Report post Posted June 19, 2005 Shurflo is self priming. 1.6gpm with 60psi has enough static pressure to get to the top of a 30' roof and still have enough oomph to spray on. Share this post Link to post Share on other sites
