Neil_Asheville 114 Report post Posted October 9, 2005 I want to set up a bypass for my unloader through a supply tank. Before I get all the stuff required, I want to make sure my pump is compatible. In looking at the pics here, can this be done? In the pump2.jpg, the upper hex nut looks to be inline on what's labeled Bypass. Do I just replace this with a MPT plug and QC a section of supply hose to the top of the tank? If you need more shots or info let me know. Thanks in advance. Share this post Link to post Share on other sites
beyoungsr 14 Report post Posted October 10, 2005 You will have to change your unloader! Share this post Link to post Share on other sites
PWkid 79 Report post Posted October 10, 2005 Hello Neil,you will need to change the unloader.The one you have there has the bypass built in to it. Share this post Link to post Share on other sites
Neil_Asheville 114 Report post Posted October 10, 2005 Thanks beyoungsr and PWKid. Mathew Johnson from NY graciously called me last night and we talked for a good 45min. Thanks Mathew! I'll be calling Tom Vogel to get what I need. If anyone has a picture of a plumbed frame-mounted unloader block it'll be worth a thousand words to me. /neil Share this post Link to post Share on other sites