Monday Im going to do a test on this, but I wanted your thoughts before hand, just for kicks.....
this is Olympic Natural Look Protector Plus, oil base stain, the label says for use on brown pressure treated lumber. its a linseed based product with some parafin wax in it.....the floor has failed quite a bit and the homeowner zig-zaged it up with a pressure washer. my concern is the top rail, steps, supports and fascia, where there appears to be a few coats on it....it looks like brown paint and is shiney, but the customer swears its just a second coat of the same stuff.
If I cant strip it properly with TimberStrip and use a semi-trans, he's open to a solid like cabots....if thats the route, is it just a deep clean, primer and sealer? or what?
Monday Im going to do a test on this, but I wanted your thoughts before hand, just for kicks.....
this is Olympic Natural Look Protector Plus, oil base stain, the label says for use on brown pressure treated lumber. its a linseed based product with some parafin wax in it.....the floor has failed quite a bit and the homeowner zig-zaged it up with a pressure washer. my concern is the top rail, steps, supports and fascia, where there appears to be a few coats on it....it looks like brown paint and is shiney, but the customer swears its just a second coat of the same stuff.
If I cant strip it properly with TimberStrip and use a semi-trans, he's open to a solid like cabots....if thats the route, is it just a deep clean, primer and sealer? or what?
Share this post
Link to post
Share on other sites