Alexy

You either have condensation build up from temprature changes that has collected in the pump and ruined the oil or your seal kit has gone bad on your pump and needs to be replaced. Drop the oil. flush out the pump to clean it and replace the oil and run it if after running it it becomes milky you will have to replace the seals and packings.

Baaaaa HAAAAAAA

Actually now is the time to jump all over it. The republicans did not listen and were voted out the dems have now had a chance for change and..... nothing. No change no improvement again hollow promisies and band aid "fixes" paid for on credit that our grand children will never pay off.

Wow, This thread cut and ran..

We were contacted by a restaurant that wanted to use a organzied barter service for hood cleaning. the barter company is basicly a credit card that charges a fee (4%) for the barter to start then you can barter among the members. The first 6 months was free then there was a fee after that. The problems were: The barter network did not have services we could really use The Barter value is based on what other companies need there was alot of use for what we did but I did not need cake decorating, condo rentals in Atlantic City NJ or free towing within 100 miles of DC. The killer is taxes you must pay full taxes on the assesed value of your work no matter what at the end of the year for services you may or may not of gotten your value from. Not worth it in my book A face to face barter works much better

It's steady but the majority is night work. Also the insurance is easilly triple what other pressure washing requires and must be SPECIFIC to KEC work.

First off what are you going to clean? The rendering line, the processing line or the packing line? Each has diffrent rules fromt he FDA as far as what you can use and the degree of "clean" you need to clean to.

I would say no leave them alone they die a slow painful death by ther own efforts

I clean hoods but that would be nice on a dumpser pad.

Adams, Very reliable works well with a longer hose and is easilly rebuildable. Depending on what you are downstreaming they last a pretty long time too. The general ( chinese junk) and the like I would pass on completely. I have a bin in a van that has about 14 of them that are dead from the seals the seats or springs being bad so they don't hold up too well. the adams lasted a good long time ( 8 months) for us we do KEC work and they get used just about every night. we switched to the check valve ones made by Bob at Pressure Tek and they have been going good for a year or more before they need replacing.

Haaaaaa

Where can I get a foamer?

What's wrong with his add?

crickets..........

United States Unemployment Rate

Vonn from the womens down hill. She is a fighter look at all her injuries and she is still right there getting the gold.

Perhaps someone should call him and ask for a clarification on it rather than the two threads on 2 forums just bashing it.

Go here Kitchen Exhaust Cleaning Stickers, MA Certification of Performance stickers, Post Cards, Service Reports, Business Cards It is run by a former husband and wife KEC team Steve and Maggie Kehoe in Cary NC. They will set you up.

31 inches

Good luck, I am pretty sure all the plow trucks are spoken for in the DC area for the next few days. The real money will be the transmission shops for the next month fixing all the transmissions, transfer cases and front hubs on all the trucks that get burnt up in the next 4 days pushing snow

nope. Works just fine on a hotsy we have

Sad reminds me of Nazi Germany A little revolution naow and then is a good thing...... Thomas Jefferson.

Sure, Just say "I will give you $_______ for that machine. "Worst they can do is say no.

Met some intresing people

Did you do well? She lost