splashandash
-
Content count
140 -
Joined
-
Last visited
Everything posted by splashandash
-
What's in your Tool Box(s)
splashandash replied to Beth n Rod's topic in Tools, Equipment & Basic Maintenance
full toolbox with enough tools to rebuild any of my machines. unloaders, igniters, pumps, hose, fittings, pretty much everything except motor and coil. my lead guy jokes around that nothing can shut us down when we are on the jobsite. -
Anyone use a udor zeta 40 for roofs?
splashandash replied to pressure247's question in Residential Pressure Washing
quit spamming -
Anyone use a udor zeta 40 for roofs?
splashandash replied to pressure247's question in Residential Pressure Washing
The pool supply companies carry a product called d-chlor that neutralizes chlorine,if you run 5 gallons through your pump at the end of the day that should work. you would have to unhook your bypass so you don't neutralize your tank of mix. -
is this a bad case of zebra stripes?
splashandash replied to ezdayman's question in Residential Pressure Washing
someone sprayed chemical on the concrete and let it dry. -
Pump of choice
splashandash replied to Mountain View's topic in Tools, Equipment & Basic Maintenance
i have always used general pumps and had good luck with them. but i just got a udor 7 gpm pump last month and it seems to be pretty well built and my workers seem to like it. -
Florida Guys I Need help
splashandash replied to Kory's topic in Tools, Equipment & Basic Maintenance
Kory there is a company on ebay i think its called florida hose guys they seem to have good prices. i havent bought from them so i cant vouch for the hose personally. Or you could get on I4 and come on over to the orlando northern store im sure they have r2 hose. -
Im good with what ever everyone picks.
-
I would be up for that when and where.
-
Don i did a roof in isleworth last year for a developer that was over 20,000 square foot,and it was the small house on the block. if you have ever been on the butler chain and looked at some of the houses you get a new perspective for filthy rich.
-
What model pump is this?
splashandash replied to NewYorkBoraPL's topic in Tools, Equipment & Basic Maintenance
its a old 2021 -
What's you vehicle of choice...and why?
splashandash replied to Beth n Rod's topic in Tools, Equipment & Basic Maintenance
Izusu turbo diesel 14 ft flatbed 8 gpm hot 5.6 gpm hot 550 gallons of water couple of hose reels couple 12 volt chem pumps 50 gallon under bed chem tank. couple surface cleaners. for what i do i dont think i could be set up any better. -
It sounds like the pressure switch stuck or went bad.
-
John i would rather have aluminum but i got steel because the price was right.
-
Engine wont start, can you help?
splashandash replied to Mark Williamson's topic in Tools, Equipment & Basic Maintenance
check your ground i just had a kohler that wouldn't start sometimes it turned out it was the ground was loose. -
Engine wont start, can you help?
splashandash replied to Mark Williamson's topic in Tools, Equipment & Basic Maintenance
good point didnt think to tell him that -
Engine wont start, can you help?
splashandash replied to Mark Williamson's topic in Tools, Equipment & Basic Maintenance
Check and see if you have spark then see if when you crank it your plugs are wet. if it sat for a long time you probably need to go through the carb. if the plugs arent getting gas then most likely the float is stuck in the carb and wont let gas in. -
im setting up a flat bed and want to run a couple pumps off of one big diesel anyone run something like that and have any suggestions or ideas.
-
hydraulic driven pumps
splashandash replied to splashandash's topic in Tools, Equipment & Basic Maintenance
anybody else i seem to remember some one from up north with some trucks set up this way -
hydraulic driven pumps
splashandash replied to splashandash's topic in Tools, Equipment & Basic Maintenance
Thanks thats the kind of input i was looking for. -
Hi Pressure Hose 50/100/200 foot. What do you use?
splashandash replied to usarose's topic in Tools, Equipment & Basic Maintenance
I use 200 ft sections and 100 ft sections r1 when you start pulling 300 to 400 ft of hose around it gets heavy. r2 is alot heavier at 300 ft than r1 is. but i also carry 50 and 25 ft sections you never no when your going to need another 10 to 20 feet its nice to pull out a little section instead of another 100 ft. -
What method do you use for cleaning Cages?
splashandash replied to Kory's question in Residential Pressure Washing
When i first started years ago i used a flojet for a while until i started downstreaming. imho it put to much chem on the surface you spend more time rinsing plants and such. -
Thank's jeff that's very helpful it's always nice to be able to see how others word things. Do you mind if we change a few things and use it.
-
When i looked into lining my box truck 10 years ago they wanted 1400 so i didn't do it, one of the worst mistakes i've made in my business. I now have a completely useless box truck behind my shop. Trailers aren't as big of a deal because they are pretty much easily replacable,but if you are running out of a box or pickup truck that is to much of an investment to lose.
-
Russ can i run a tsf2021 or a tsf 2219 at 3000 psi with 20 hp. the general pump website says i can use 20 hp but i want to no real world if it will work.