Jeffrey Abrams

this is test

Thanks to everyone who responded. As to what I used - gutter zap on the gutters and blend of sh andC-86(potassium Hydroxide based) to wash the house. As to why she waited 2 months I'm clueless. This is a repeat customer who lives in an over 55 community.(they are very old) I know if she would have called in a couple of days I would have not had a problem getting it off.

I cleaned a house two months ago and now the home owner calls and said her new windows are stained( which they are) I believe either my gutter cleaner or my house wash left what looks like water spots that are outlined faintly in white. I've tried everything that I know goofe off, denature alcohol Any thoughts?

Does anyone know what to use on a tennis court without damaging the surface. It's a rubbery surface3 ( green and red)

Did anyone use Cabot's SPF this year? I would be interested in any feedback on this product. Likes or dislikes? How does it compare to Bio Wash products? Thanks

I am trying to come up with a working solution for traving with chemicals. I now have a 18 foot open travel in which I want to carry chem. for all different cleaning jobs. Space is limited. Trying to figure storage between 5 gallon pails, 55 gallons drums, etc. ? Any suggestion on how to safely travel?

I have wooden doors that I need to sand and apply 2 coats of a polyurathane. At the base of most door there are black kick marks from shoes I'm guessing. I was wondering if there is anything I can use prior to the sanding to remove these spots?

I,ve noticed that newer gutters( one to two years old ) are not coming clean. The black streaks do not come out. I,m using products like gutter zap- works well on older gutters. Anyone notice this? Any thoughts?

I have the opportunity do bid on a very large concrete on new construction,(sidewalk, driveway, etc) The concrete has ground in dirt(clay?) also a lot of tire marks. What would be the best product to use ? There's no mold etc. Need to give quote fast., Thanks Again the concrete is new.

Beth,Rod Thanks for the info

I was wondering how some of you charge for travel time for jobs not in your normal working area? If you have employees do you charge travel time per person?

Pollen had coved newly installed pavers, so the home owner applied Zep driveway and concrete cleaner and Zinsser's Jomax mildew killer through his power washer.It left a efflorescence; I trhink. The pavers are gray - now they have a white cloudly look. Today I tried cleaning them with my standard cleaner which is a potassium hydroxide based cleaner. Result not so good. Some pavers look sthe same , other have a white outline on the face of the pavers that is in the shape of a playing card. Any advice on how to improve the appearance of these pavers?

Squirtgun, thanks for the well wishes. I'm really feelilng the heat this year know that I,m older. Everyone thanks for the infromation- its going to be a diffilcult quote

I could use some help in pricing a vinyl fence. The fence is 5 foot high and is not a solid fence. I has 4 rails only between post. Each section is 8 foot wide and there is over 4000 linear feet total. My customer wants to have the job broken down into section and would consider cleaning every 6 months to keet the mold/mildew off . Since its runs along the propery it is very long. Some of the fence however is horse and live stock corrals. I was wondering if anyone had any experience in pricing this type of job or how much I should charge per section. Thanks

Seymore, the wood is pressure treated and about 10-14 years old. It iver a week old and the wood was still not dry. We stripped it because after it dried it was blotty wear the stain did not penetrate. Would you use a light mixture(3/1) of bleach to open the pores? Also, someone mentioned an acetone treatment? I do not know what that is, do you?