Carolina Clean

Yeah I guess I just need to add more.

Just finished the 3,500 sq ft. house and driveway. Took me 3 hours. About 15 gallons of solution.

I did a 1,800 sq ft. house today and only used 5 gallons. So some around 6 to 7 small houses. A lot less then the X-jet setup I was using. Have a 3,500 sq. ft. stucco house tomorrow plus the driveway. Will update.

Well I finally got to use the new setup today. Was waiting on the 2.1 injector to come in. Well I love it. It's so much easier to use. Getting a good amount of chemical on the house now. Mixing 3.5 gallons of 12.5% chlorine, 1.5 gallons water & (2) 8oz scoops of Simple Cherry for every 5 gallons. 35 gallons total. I think I need a little more surfactant in the mix. The chemical doesn't seem to have many bubbles in it. So I think I might add some Dawn to the mix. Thanks for the input. Especially the injector. ;)

Hey guys just wanted to show you guys how I transfer my 12% SH from a 55 gal. drum to my 35 gal. chemical tank. Hope this can help someone. I know the pump isn't made to pump SH but I flush it with 5 gallons of water after. Only paid $25 ish when it was on sale and used the 20% off coupon. I got the warranty with it. It's a little of a pain to prime but once you get it going it pumps almost 11 gal. a minute. Beats hand pumping 35 gallons. 1" Clear Water Pump

Got a 8gpm unit 3000 psi. Looking for a surface cleaner in the $500 range. Witch one should I get?

Yeah that's what it's for. No long distance runs. Yeah no license plates here.

I spayed it on and painted it on with a brush. Spraying it is messy. Don't get the stuff on your skin. It won't come off for days. Maybe a week of scrubbing. It looks good for a few weeks. Nice and shinny. The it fades. Lots of grip. You can reapply anytime you want.

Yeah I think Im done with adding stuff. Maybe a place to mount a surface cleaner. If I run into any issues with DOT and the weight. I'll just get a smaller tank. It's just a buffer tank. I think I can get away with something smaller. Oh and the straps like I said before. I never ride with the tank full and I think it will be ok. But will look into the metal ones.

No it's PVC.

Got everything setup and ready to go. Can't wait to try it out. Here's a short video. http://s47.photobucket.com/albums/f194/carolinaclean/?action=view&current=2011-07-03_15-08-15_734.mp4

Rynolined.

GOOD TO GO!

What do you guys think of the plumbing. Cost $7. Do you think I'll run into any issues? It's just mocked up will cut, glue, etc when it's strapped down.

My injectors are from him. It's a 2.3.