CNY Hood Cleaning

I would rebuild it on some spare time lets say in the slow time(winter). Much cheaper. I'm going to be rebuilding one of my machines and its a good way to go if you know what your doing... Go for it. :tennis:

LOL That is funny

Bunch of punks.. Hope you get your rig back Jeremy.

I would stick with a well built pw for hoods. I've owned a Hotsy 555ss before(it's electric/diesel) and it has worked fine for hoods. My PW get a nice work out every week, so buy something that will not break down every week cause it's gonna cost you.

Oh so same concept that you would have on a water heater in the basement

got a pic of it or something cause I don't think i've seen it. I have mine threw the roof using the black pipe with a 45. Then I have it insulated so it doesn't get hot in the trailer heat goes up. The exhaust threw the floor.

You can have a baby seat in the truck only if you turn the airbag off. But Yeah a truck looks soo much better and more professional.

One of them is a Ford E-350 5.4L (yeah baby)

any updates?

It made me very nervous.

I had it hooked up to a main with good flow(and I used it a week before without issues) I had the hoses flushed before starting the PW. And I used the PW for an hour before I started to get this issue. Then the problem went away. So no air in the house and no juddering in the gun.

Oh and it's a General Pump 4kpsi @ 4G/min

The other night I had my Gas PW started to loose pressure also for about 1/2 hr. It would loose about 200 to 300psi. I noticed that when the gun is pulled it was 200 to 300 below what I set it up to. Then about 5 to 7 seconds goes by and it regains the correct psi while the trigger is pulled. 1/2 hr goes by and everything worked correctly for the rest of the night. The unloader is on the pump. So is it the unloader also? Now I flush the hoses before hooking up to the PW to minimize garbage in the pump. But I do use RV antifreeze in the pump so it won't freeze.

LOL their not responsible??? Just find a good attorney and stop waisting your time with the owner. And also get them for the lost of work and aggravation.

Yeah I use 2 1000 cranking amps marine grade batteries. These suckers last. (blue ones at autozone)

General Pumps are the way to go. My 4000 PSI @4Gal Min still runs great.