PWkid

I received an infraction, last week for a post that was 3 months old, I'll leave it at that. I appreciate the opportunity that was asked of me to be a moderator on TGS. Unfortunately, I am resigning as a moderator and would like to thank the TGS staff for all its support up until a week ago. I would also like to say that this has NOTHING to do with the other moderators that have left, this decision was made when I received the infraction. I reread the thread several times and for the life of me could not figure out where I deserved the infraction. Then like a bolt of lightning it hit me as to why I received it. I am positive it had nothing to do with a post that was THREE months old.

Now Scott is anything ever PRIVATE!

Well, Beth you don't have to be curious anymore.

I guess what I am saying is, if you are going to run this board and DEAL out infractions, it should at least be current,not brought to your attention by someone SEARCHING through threads THREE months old. Its kinda like punishing your kids or dogs, for something they did THREE months ago.

Well said Scott, hhhhhhhhmmmmmmm. I too got an infraction Today (from 3 months ago). However it is explained, I will never understand that one. Maybe I need to get too 2500 posts,or (100) to be an Informational influence to the industry.

When you downstream it is after the pump,when upstream it goes through the pump. I would never x-jet because of the carrying buckets issue. I have been d,streaming for a very long time and have tried an x-jet once it still sitting on my shelf after 4 years. I do go by and blow the dust off from it every now and again.

Craig is his name Rob or Ron. lol

That size tile roof I would charge twice that and be done in about an hr.

Steve I owe you an apology I was under the impression anytime you redirected a link to anywhere but your site, TGS considered it spam. I was wrong my bad.

Steve all that is fine,but I think when you post a non-tgs members link it looks like spam. Just my opinion.

Steve, keep up the good work but ,in the future point your giveways to YOUR website, not a non-member of TGS. It will never benefit you.

Yea I would love to know also, the pump I am using is lasting over 2 years and is 290 psi 4.3 gpm without an air compressor,and is proved to be a chlorine pumping machine,without incedent.

The thing that amazes me is most people know what chem works for them and most of the OLD TIMERS still think its a secret. WELL the secret has been out for a long time. Most have their OWN formula but for the most part it is the same ingredients. This BBS is all about teaching others the correct way to cleaning and if Someone post pics of a BEFORE and AFTER I think they need to TEACH the NEWBIES (if asked) how they achieved those results. If I am wrong someone PLEASE correct me.

The only time you should need a puller is if it is siezed on the shaft or it is so tight the bolts break when tightening down to loosen the pulley.

Thanks We are covered also, but if you have any roof cleaning jobs over this way we will be happy to reciprocate. Coming from a guy that USED to do 5 MILLION a year, I would consider it a privledge. I would be able to tell people that this job came from MALLARD (they USED TO DO 5 MILLION A YEAR IN ROOF CLEANING and sold it for who knows what amount),but now they operate under Terra Clean. AC I gotta ASK you, if you were doing 5 MILLION A YEAR in ROOF Cleaning why in the world would you sell? AC I also gotta tell ya ,that the secret has been out for a long time, maybe (back in the day) you had the market cornered BUT today its a different market.

Larry they are still visible on my end,as of now.

UH I still see the pics. Did I miss something?

Fishgazam you once sold it for 5 million dollars a year. Why not reveal it now? You are on a BBS that prides itself on education,not self-promotion.

Well, if you would announce what time the chat is would be helpful. lol

Excellant work,its amazing what low pressure bleach will do.

HUH! What was that dear, oh yea I'll take another beer. lmao I get the beer right up side my bald head. lol HAPPY VALENTINES DAY.

4gpm x 4000psi =16000/1100= 14.5 hp gpm x hp /1100 = the amount of gas powered horsepower it takes to = these results. Just a thought. lol

Yes it will mark concrete.

I would hope if your inquiring about 1/2 inch hose you are using over 10 gpm, some manufactures use 1/2 inch hose for the first 50 or 100 ft then go to 3/8 hose. 1/2 inch hose is very expensive. I will go out on a (limb) here and say it is not made in non-marking hose.

Too many people in this world running businesses for less money than they could make working at McDonalds. And I am sick of it. Daniel this last line of your post Sums it all up for you. You need to seperate yourself from the people you mention in your last line of your post. I am not sure where your frustration is coming from but I think you are frustrated about what your market will bare. Either move your business, promote your business better, or become a better salesman. I don't think publicly chasting others about money YOUR not making, is the way to go about BEING A BETTER (BUSINESSMAN). Just my honest opinion. Daniel I have seen your post on here and other BBS's, you are always worried about what other businesses are making. I DON'T GET IT. I am sure others aren't getting it either.