aquabob

hi coachs, the final ratio coming out of the nozzle applied to the siding should be 10:1 to 14:1 depending on how "thick" or what color the mildew is, thats what the "dirt" usually is, it relly depends on your area and what you are washing off to finally determine what your housewash mix should consist of, ideally your set up should be the pwasher and a downstrem injector with the appropriate nozzle, an xjet usually means you have to carry buckets of chems around, get an injector that will work with your gpm and nozzle combination and put a chem tank with straight bleach in itand just let the injector siphon it out...

Sharpen your plumbing skills for rig building pipe roll and toobz they got free lite versions it's fun and free check em out in app store...ha ha..another fun game not related to water flow is tiki totems have fun.

I use purple power full strength in winter but I have to spray carburetor cleaner on the brush with the p power it works but gutter streaks are almost impossible to clean once temps get below 60 f...I tried hot water didn't work for me plus I think uv rays have alot to do with it..u know those stereaks are a oxidization prob with the paint so sometimes it's just not cleanable without removing paint a prob I've had in the summer but try the Walmart carb cleaner it works for me.

i have a 12 gal tank mounted in a van, the pump and hose reel are fix mounted in the van too, the only draw back is having to pull a 2nd hose out but its not too bad. i havent ever rinsed out the pump it has had chem in it now for 2 years no probs at all with the pump.

i use a pumptec pump i think its the same one thats used on the deckster, 200 psi @ 1 gpm. have a dedicated hose reel with 200ft of 3/8" hose. made a couple of lances one 4ft and one 12 ft with qc's that hold a 40 degree nozze for low gutters and the 12ft lance uses a cat pro chem nozzle that sprays 30 ft. for the high ones. i also have a 30 ft extension pole for when i have to brush. this set up also doubles as a stain sprayer. works great.

i agree with that, just bleach the whole thing it will even it out.

hi hugh glad to hear things are picking up for you. been slow here with the drought and the housing market goin down. got a big job comin up that will help make up for the slow times though...im still working outta that van too!

i do roofs, i will call you tomorrow. im in douglasville. my number is 770-596-2964.

if the sun dries it on you may have to brush it then rinse, oxidized paint around window frames can cause it too. dont know why ur using car wax in ur house wash, that could cause the prob too. i use bleach and liquid laundry detergent it rinses away every time except when its uper hot, try to rinse it before it has a chance to "'bake"' on.

you know it takes more than just chlorine to clean a roof...hoses, pumps, etc etc...so what if the info of how is on the net, you can find info on how to build a house too but if someone wants to do it themselves they will, if you are busy enough cleaning roofs why worry about it?

9gpm is a bit high i think, you can end up wasting alot of chem with it. 6 gpm would be better, 9 gpm would be great for rinsing tho. go with a 5/8 hose. you will need two tanks one chem and one water, you can splice off the suction line of the pump and use a needle valve or a gate valve to vari the flow of chem. or you can have two tanks one with roof mix and one with siding mix but then you will need a third tank with water as a float tank and for rinsing. the more efficient set up would be the two tanks with a valve to control the strenght of the mix. i use a low pressure pump for siding it works great.

the lacquer thinner worked like a champ, thanks.

i got some deck scapes oil based stain on hardy plank, tried a strong mix of hydroxide let dwell and scrubed with brush, wouldnt phase it, tried some carb cleaner got some off but not all, re applied that 3 times still wont come off, anyone know what i can use to get it off?

hey i visit this board at times and post when a subject is interesting or if i can answer a question that i have experience with, now i get a message that says "etc you havent posted in a while please take the time...etc" so i try to respond and i get a list of rules and check the box if i agree and comply..... it really kills my whole sprit to communicate, man i swear i feel like im typing into russia or some communist web site, whats goin on?....

i know, sorry about that, you can search it on that site the pics are on the fourth link on the mcnaught page, the page address is the same there dont know why it doesent work anymore.