marco

I just purchased a new whip hose for my machine.So when I tried to put the hose on it didn't fit.(thread to small) So I took off a brass piece that was hooked up to the unloader and it had a spring and ball bearing .Does the spring and the ball bearing belong attached to the unloader (its a tiny spring and I lost it ) Can I hook the hose up without that piece?

I put my unloader back on my machine.So I started it up and a hose busted. It is a 1/4 inch hose.So I went to Home depot and bought a 250 psi braided clear hose and that broke also(twice). My question to you Professionals is,Where can I purchase some hose for my unloader at a reasonable price? I thought that 250 psi wasn't durable enough but went with it anyways. I thought I remembered reading about someone else using that type of hose. Any info. would be a big help! THANK YOU!

Does anyone have a photo of a GP2124 unloader installed on a mi-t-m 4000psi 4.2 cold water is supposed to look like ?I need to install !THANKS

I'm pretty sure when I pull the trigger the pressure goes up.I thought it was supposed to go down.Not sure if that makes any sense.

Hello! I just installed a pressure gauge on my pressure washer today. I have a 4000 psi 4.2 gpm cold water unit.When I let the machine run without pulling the trigger the pressure fluctuates between 3000 and 4000 psi.The machine will idle at 3000 psi for about 8 seconds then the psi rises to 4000.When this happens the spring on the unloader moves a bit.Just wondering if this happened to any of you? Thank You!

Hello! This question is for anyone that cleans the inside of gutters.After you remove the leaves and debris, do you use a brush to clean the inside of the gutters?Or do most people just remove the debris and collect? Thank you!

I bought a 28 foot green bull extension ladder yesterday at a yard sale.It is in good cond. Is anyone familiar with the green bull brand?

Is snaking when you send some type of brush through the down spouts?

anyone?

the prices listed above are for the inside of the gutters right?

Yeah ! they are a pain in the neck.But I could use the money.I was just wondering How to price this job.I was thinking of charging $300 to clean gutters in and out what do you guys think?I was going to downstream gutter grenade on then brush the gutters.

Yeah ! they are a pain in the neck.But I could use the money.I was just wondering How to price this job.I was thinking of charging $300 to clean gutters in and out what do you guys think?

a landlord wants his gutters cleaned inside and out.the gutters measure 120 linear feet. It is a 2 story home.I know some contractors get about 1.00 a foot,but does that include outside of the gutters?When measuring linear feet do you guys measure down spouts? I would really appreciate any info. Thanks!

I want to put a pressure gauge on my machine,but I am not to sure where to put it.Can someone maybe show me a picture of one mounted?I also wanted to know the main reason for installing a ball valve near the gun.THANKS!