Lenny Schrec

Why not get the rotten wood out, put in foam some backer rod then put in self leveling concrete repair caulking? I have used the caulking to repair cracks.

I got a request for a deck in Falls Church, VA. thats to far for me to go, anyone out there want the info.. E-mail me

Does anyone offer day porter services? I have the opertunity to bid on a day porter job. I will need someone 8hours on days and one on evenings 4 hours both 5 days a week with the 4 hour person covering weekends. If anyone has any experance please drop me a note. Thanks

Go to Awning cleaning, awning sealing, and awning coloring supplies for the professional and check it out. Their products work great and they will help you out getting started

We use the deckster from sunbrite. It works great. Well worth the price. We have had it for a few years and sprayed oxcylec acid to stain to concrete sealer and all work good. We have had to rebuild the pump once or twice because it did not get cleaned out after using it and they are easy to rebuild

There is a product that Trex recomends for their decks. It is Anti Growth or Protex made by Anti-Growth. We have used it and it works good. We did a deck and the guys missed a small area and we went back a cople of months later to clean this small area, it had mildew and mold spots on it already

Too bad the battery is so small. it will only last 30 to 45 in. Take a look. iRobot - Robots: Gutter Cleaning: NEW! iRobot Looj™ 150 Gutter Cleaning Robot

There is alot of good info at moldadvisormain. They say bleach will not kill mold in a place like this. You might need something else they have.

I have a source to get the 275 gal totes, one about every 2 weeks. I will be seling them as I get them. My only problem is where to get the conector for the outlet. It is 2 1/4 inch there thread or a snap on. Where can I get them?

I have used H&C before on garage floors and had to etched so it is alittle rough like sand paper. Most driveways are rough enough.

Brandon, Welcom to the board. We use a deckster for semi-transparent and depending on the deck we either use an airless sprayer or by brush and roller. A sprayer is the fastest but you need to take in the cleanup time if it is a small deck or only the floor.

What about using a solid stain. Just clean and remove any loose paint and go over it.

Well I got this deck stripped. I had some HD 80 but was afraid it would not be enough so I tried some Remove I got from Sunbright. It did the job. I mixed it twice as strong as recomended, 1 bottle to 2.5 gal. water, and had do strip 1 layer at a time. I knew it only had the base and 1 layer on top of that. I wished I tried the Remove at 1 bottle to 4 or 5 gal of water.

Thanks for the advice, I will strip it instead of covering it. I have a bucket of HD 80.

I just got back from vacation. I already told the customer that it would most likly not come off and we would cover it up with a solid. He was happy with that. He wants it to l;ook good to sell the house. Thank for the tip Beth