Jump to content

AquaTek2013

Members
 View Profile  See their activity

  • Content count

    41

  • Joined

  • Last visited

  • Days Won

    2

Posts posted by AquaTek2013

  6. Posted · Report reply

    All of these doors are covered. I'll get some pictures. I still haven't got by to give a quote yet. I figured I would pull each door down and work it off of padded saw horses. If it is a factory stain, how would I figure out what to strip it with? What stain would you recommend using? I thought about putting a marine grade poly over it? What would be your thoughts on that? I'm certain I couldn't do that over any oil based stains, right? If I don't use the poly what would be a good route to go? I want to be able to present options when I go back to meet with them

  8. Posted · Report reply

    Have you ever stripped, cleaned and restained any exterior doors? My last client asked me to come back and do all the doors with the same AC stain I used on their deck and fence. How would you approach this job and how would you bill it? There are 7 doors total around 8-9ft tall and standard width. They all have glass in them. Is that an issue when stripping them? The old stain appears to be an inferior water based that is faded out in some areas. What would I strip them with?

     

    I'm open to all input here folks! Thanks a bunch!

  9. Posted · Report reply

    Thanks David!

    Guys, this client has already called me back for another project! They also asked me to bring business cards as the neighbors are asking them about my company. Pretty thrilling! You all helped me so much on this project and I really appreciate it!

     

    I'm going to start a new thread about the next project.

     

    I will post some more pictures here when I get back to take some

  12. Posted · Report reply

    Beautiful chairs! What little I know about cypress is that it retains it's natural oils almost indefinitely. It is naturally resistant to rot and termite infestation which is what makes it such an ideal wood for homes in our southern climate. I don't know for sure but I have always been told not to apply anything to cypress because it would seal it and cause it to rot from the inside out. Has anyone else ever heard that?

  13. Posted · Edited by AquaTek2013 · Report reply

    post-8375-0-28079700-1392821459_thumb.jp

     

    We completely restored this deck. We set all the exposed nail heads and screws, added screws where needed, stripped what was left of the old failed and inferior sealer, cleaned, brightened and brushed the furrs and lightly sanded the extremely weathered wood, replaced a few bad boards, added a new rail cap all the way around, added structural support to the poorly designed hand rails and finally finished with AC! This made for one happy customer! I learned so much about what to do, what not to do and how to fix mistakes on this project it is unreal! I still have another deck and a few hundred feet of shadow box fence before this entire job is complete so I will have more b4 and after shots when it is all done. Thanks to all of you who have helped me along as I have worked this job!

    cleanhoods and Jake Clark reacted to this

  14. Posted · Report reply

    I'm curious too....who said it?

     

    Beth

     

    It's not that he actually just flat out said it but it is what he promotes and sells on his website. My intent was not to make him or anyone the subject matter but to get some clarification on what the general consensus is and to learn.

     

    My thoughts on the subject are that oil would seem to do more to actually prolong the life and condition the wood. I'm sure waterbased products penetrate deeper but then again, so does water, right? Also, I think about what is needed to "clean up" after applying the stain. These are just my own thoughts and the questions my mind seems to focus on. Considering I am just learning, I have to try and see things from other perspectives and have things explained in ways that my mind doesn't want to see. Does trhat make sense?

  17. Posted · Report reply

    Thank you! That information really helps a lot. So, it still seems like oil based is the way to go from the get go. I was just puzzled when I saw a nationally known and very well respected woodie promoting and selling a waterbased stain. I didn't see where any oil based product was used or promoted and definitely not sold on his site. So I figured I had missed something somewhere

  19. Posted · Report reply

    I'm a bit confused. Everything I have read seems that most pros prefer and recommend some form of oil based stain whether it be parrafin or linsead type. Is this correct? Well, I was doing some reading on various "professional's" websites and stumbled on one that I think is highly respected in the trade and he sells and uses water based. What's the deal? What am I missing? I want to learn all I can about all of it so I can be informed and share that information with my clients when we are making decisions on their wood project. I'm not really trying to start some war and I tried looking through previous posts on here but I don't see a search funtion?

     

    Thanks to all and thanks to Shane Brasseaux for turning me to TGS! I really feel like this is the place for professional woodies!

  20. Posted · Report reply

    This will be my first spring in business. I started my business November 1st and I have been preparing for spring since then. LOL I intentionally started in the slow season so I could take my time, learn all I could and just ease my way into it. So far all has gone GREAT and pretty much as expected. I'm looking forward to seeing what my first "season" looks like. I have definitely learned more on the "fly" than I imagined was involved in this business but I love it! I love new challenges and the almost instant gratifying return is exhilarating to say the least! I can't wait until I get established and build up to a full timer!

  24. Posted · Report reply

    Hey chief, nice to meet you. 11 years Army Infantry here.

     

    I have to assume he means solid acrylic stain.

     

    I learned here last season to boost with a butyl based degreaser. Luckily, I found a local guy that make a mean mean degreaser.

     

    Be careful though, the boosted stripping agent will fur certain wood and will burn you easily if it contacts your skin.

     

    Thanks brother! Good to meet you as well! I'm just one of those danged ol' POGs! LOL Maintenance my whole career. 17+ years and counting

×