Removing pulley from AR pump

[Removing pulley from AR pump]

Sorry I've been gone for a while.  I just am getting caught up enough to try this again.  Knock on wood.

[Removing pulley from AR pump]

OK guys,  When I get home from work this afternoon I will try using the bolts in the larger holes.  Also, one of my friends at work has loaned me a gear/wheel puller, in case that doesn't work.

 

Thanks!

Sean

[Removing pulley from AR pump]

Hi Chris,
There isn't any set screw that I can see.  Let me try to attach a picture of it.  There is a keyway with a groove on the other side but thats all I can see.
 
Thanks,
Sean 

[Removing pulley from AR pump]

Hi All,

I just bought my first belt drive cold water gas washer.  I bought it used and it has plenty of miles on it but the Honda GX390 motor started right up and the price was right so I took a chance.  My question is this, the pump, AR XRCA 4G40H, needs to be serviced and I want to do it off the machine.  The unit has 3 belts and I have removed those but I have to get the pulley off the shaft and I am not sure what puller to use.  There isn't a center bolt, it has a keyway in the center.  The pulley has 3 small bolts in a triangle around the center so I am thinking those are for the puller.  So, do I attach the puller and start turning the bolt?  Or do I have to figure out what to do about the keyway?

 

Many thanks,

Sean

 

PS. The washer doesn't have any manufacturers markings that I can see.  It's got a lot of concrete splatter on it.  A lot!:))