4000psi 16 Report post Posted November 10, 2007 Looking for those of you who have used this product, link is below. Can you run the chem through the chem injector? Any input on this you have would be great. thanks www.Restor-a-deck.com Share this post Link to post Share on other sites
0 bigchaz 157 Report post Posted November 10, 2007 Its sold by ken f. from pressure pros on this site Its powdered chem so youd have to dissolve it to put through injector. Are you looking to use it for your own use or to recommend to homeowners? Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 10, 2007 Hi Dane. I'd be happy to anser any questions you may have. Shoot me an email if you wish sales at restore-a-deck.com or you can call (800) 791-9890 and hit dial Ext 300 Mon-Fri. We have some cool contratcor programs available that might interest you. Share this post Link to post Share on other sites
0 4000psi 16 Report post Posted November 10, 2007 Hi Dane. I'd be happy to anser any questions you may have. Shoot me an email if you wish sales at restore-a-deck.com or you can call (800) 791-9890 and hit dial Ext 300 Mon-Fri. We have some cool contratcor programs available that might interest you. Hey, I realized later that you were the owners of it. I had seen it on this site just hadn't put 2a2 to gether. Is it good for comercial use, is that what you use? I'll definatly get in touch. Thanks Share this post Link to post Share on other sites
0 4000psi 16 Report post Posted November 10, 2007 Its sold by ken f. from pressure pros on this siteIts powdered chem so youd have to dissolve it to put through injector. Are you looking to use it for your own use or to recommend to homeowners? Yes, I am looking at using it when I do decks. Have you used it? Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 11, 2007 Dane, We use it in the field exactly as it is sold to homeowners. Share this post Link to post Share on other sites
0 4000psi 16 Report post Posted November 27, 2007 How do you mix for use in chem injector? I have a 3.5 gpm Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 27, 2007 Dane, Restore-A-Deck is a mild stripper and cleaning agent. Its primary use is for killing mold and removing failed finish in enviroments where using a landscape friendly product is prudent. Restore-A-Deck contains sodium percarbonate (and other more potent cleaners and surfactants). Sodium percarbonate and bleach are the only products for wood that are classified as mold killers. The quick product background is so I can give you the one caveat.. You have to apply it directly or via X-Jet for it to perform. Run through any type of up or downstream injection, the product will be too watered down. If you are going to go that route, a better product selection may be something along the lines of a more caustic deck stripper. Share this post Link to post Share on other sites
0 4000psi 16 Report post Posted November 27, 2007 I have an x-jet. Im assuming I would use the low pressure attatchment and mix as directed? Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 27, 2007 Dane, yes.. full strength is mixed at 8-10 oz per gallon. Over 8 oz and you should use warm water so all the percarb will dissolve. Share this post Link to post Share on other sites
0 Deck Guy 14 Report post Posted November 28, 2007 Dane, yes.. full strength is mixed at 8-10 oz per gallon. Over 8 oz and you should use warm water so all the percarb will dissolve. ...and since you're a newbie, let me add this to the discussion...NEVER MIX PERCARBONATE CLEANERS IN A SEALED-TOP CONTAINER!!! I just use a five-gallon bucket and draw from that. Share this post Link to post Share on other sites
0 4000psi 16 Report post Posted November 29, 2007 Draw into what? What do you use? Share this post Link to post Share on other sites
0 Deck Guy 14 Report post Posted November 30, 2007 Mix the percarbonate cleaner in a five gallon pail, insert the hose from your x-jet into the pail, and you're on your way. Share this post Link to post Share on other sites
0 4000psi 16 Report post Posted November 30, 2007 dosen't that water it down? Share this post Link to post Share on other sites
0 A and J POWERWASHING 64 Report post Posted November 30, 2007 4000 yes it does add water to it , you will have to do some math ,to get the right mix at the surface , ken should be able to help since he sell it , Not try to put him on the spot . Ken need to call you some product any way . when is a good time Share this post Link to post Share on other sites
0 A and J POWERWASHING 64 Report post Posted November 30, 2007 Larry is right with not put the cap on , heard some storyabout that never did it myself Share this post Link to post Share on other sites
0 4000psi 16 Report post Posted November 30, 2007 Yeah I need to call him again. Thanks for the help. Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 30, 2007 I'll just be doing some yard work on Saturday. Feel free to give me a ring. I'll have the RAD call center forward calls to the tech support extension to my cell. Share this post Link to post Share on other sites
0 A and J POWERWASHING 64 Report post Posted December 1, 2007 that call it will be around 1:30 Share this post Link to post Share on other sites
0 Russell Cissell 65 Report post Posted December 1, 2007 Another very important safety issue is to never add bleach to this solution. It is a good idea never to mix chemicals without checking with your suppler first. This is just one of those cases to make that point. Mixing bleach with this solution can be potentially fatal. Russell Cissell ESI Share this post Link to post Share on other sites
0 Barry M 73 Report post Posted December 3, 2007 Great advice Russell. Share this post Link to post Share on other sites
Looking for those of you who have used this product, link is below. Can you run the chem through the chem injector? Any input on this you have would be great. thanks
www.Restor-a-deck.com
Share this post
Link to post
Share on other sites