What happens when you mix EFC-38 & SH

[Tonyg 14]

Let me guess - FOAM

I was cleaning a fence today and had everything set up on a piece of plywood in the middle of the yard. I ran out of the EFC-38 and decided to finish the last bit with a weak batch of HD-80 & SH. I figured there was only about an inch or so of the percarb in the bucket and just poured in the new batch.

I was able to contain most of the foam spill but it was like I poured dawn into the dish washer.

Edited April 4, 2009 by Tonyg

[PressurePros 249]

Tony, this is what immediately came to mind:

[ame=http://www.youtube.com/watch?v=Yhs7eCliAHA]YouTube - Bobby Brady overflows washing machine with suds[/ame]

[fireandrain 39]

Don't be goofing about with SH and strippers.

[Tonyg 14]

Don't be goofing about with SH and strippers.

Just a moment of stupidity - laziness in not running water through before using a different chem - one of those things at the end of the day.

Ken, that was close.

Next I think I will save time and mix my caustic and acid together the night before and just shoot one application. :eek:

Edited April 4, 2009 by Tonyg