I have the opportunity to bid a large project, water treatment plant. Involves the interior of a 8' in diameter pipe, several thousand feet. No hazardous material concerns, just a return discharge pipe that needs to be prepped before it is relined.
Specs require a 20,000 psi Hydro Blaster. I have found several sources to rent from, and they will provide training and support as part of the agreement.
Since I've never been on the business end of a 20,000 PSI, 24 GPM wand, I'd like to hear your experiences.
Working inside a 8' pipe is probably as low on the totem pole as it gets for pressure washing, especially here in Arizona with the heat. Access holes are located every 100' at the top of the above ground pipe.
Anyone have any experience with Hydro Blasting ?
I have the opportunity to bid a large project, water treatment plant. Involves the interior of a 8' in diameter pipe, several thousand feet. No hazardous material concerns, just a return discharge pipe that needs to be prepped before it is relined.
Specs require a 20,000 psi Hydro Blaster. I have found several sources to rent from, and they will provide training and support as part of the agreement.
Since I've never been on the business end of a 20,000 PSI, 24 GPM wand, I'd like to hear your experiences.
Working inside a 8' pipe is probably as low on the totem pole as it gets for pressure washing, especially here in Arizona with the heat. Access holes are located every 100' at the top of the above ground pipe.
As always, your input is much appreciated.
Share this post
Link to post
Share on other sites