marco 14 Report post Posted January 18, 2011 does anyone know how to make there own downstream tips If yes could you tell me a website to check it out?THANKS Share this post Link to post Share on other sites
Paul Kassander 26 Report post Posted January 18, 2011 Are you looking for angle or 0 degree? For 0 degree you can drill out a 1/4" brass plug for a flatter fan try flattening out a hose barb. You will get a little angle but it won't be as nice as a machined one the manufactures make. I am surprised you would want to waste your time though most soap nozzles are only $3-6 from any of the vendors on the board and hardly ever wear out. Share this post Link to post Share on other sites
chris francis 15 Report post Posted January 19, 2011 Paul I think he wants type that for long shoting of soap and types for soft washing. Long shoting soap I use 1\4 hose barb. Paul I have 4.5 gpm 4000psi pump looking for holder and set tips that I can soft wash can you pm me prices for setup for soft tips. Share this post Link to post Share on other sites
Paul Kassander 26 Report post Posted January 19, 2011 Sure thing. Share this post Link to post Share on other sites
Doug Rucker 31 Report post Posted January 20, 2011 Paul me too, 3500/4gpm. you can pm me or email me dougrucker21@gmail.com Share this post Link to post Share on other sites
Paul Kassander 26 Report post Posted January 20, 2011 On the way Doug. Share this post Link to post Share on other sites
mricozzi153 14 Report post Posted April 18, 2011 Paul, can you please PM me the setup for these soap and softwash nozzles. Thanks, Share this post Link to post Share on other sites
