BOSSMAN 14 Report post Posted March 3, 2011 Wanted advice on Mold Removal Technique on untreated wood pallets. These pallets have very light mold. Would high heat and cleaner do the job. Want to avoid using bleach. This would be a huge contract for me and any help would be appreciated.Thanks! Share this post Link to post Share on other sites
0 NateF 14 Report post Posted March 4, 2011 Does the customer not want you to use bleach? If they aren't against it, I would use a light solution of bleach ds on and go to town with about 800 -1000psi with no heat. Im sure others on here will have someo other ideas for you if you can't use the bleach. Share this post Link to post Share on other sites
0 Celeste 341 Report post Posted March 4, 2011 Wood = NO HEAT, low pressure. Why the aversion to bleach? They're pallets, not fine wood. Share this post Link to post Share on other sites
0 sprayer dave 14 Report post Posted March 4, 2011 This may be dumb questions, but why do they care if there is light mold on the pallets ? What are they using them for? What would you charge to clean pallets? Share this post Link to post Share on other sites
0 aboveb 14 Report post Posted September 7, 2011 Agree with the poster above, light solution of bleach will do nicely. After you're through, there will be no bleach odor left whatsoever. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted September 7, 2011 Percarbonates and sodium hydroxide based cleaners will work well and the latter can be neutralized afterwards with citric acid based brighteners. Rod!~ Share this post Link to post Share on other sites
Wanted advice on Mold Removal Technique on untreated wood pallets. These pallets have very light mold. Would high heat and cleaner do the job. Want to avoid using bleach. This would be a huge contract for me and any help would be appreciated.Thanks!
Share this post
Link to post
Share on other sites