desi 14 Report post Posted November 13, 2004 Do most of you guys take the hose from the unloader and put it right into your tanks? If so, what are the pros & cons of it and please explain how I can set it up. thanks Share this post Link to post Share on other sites
Henry B. 4 Report post Posted November 13, 2004 We do, that way if we leave the machine running when we stop for a break it won't overheat the unit and it's easier on the machine since it's not constantly cutting the pressure on and off. I didn't set mine up but basically it's just a hose running from one of the empty ports on the unloader to the top of my tank. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted November 13, 2004 Eric, It is better for the machine all around, but if you upstream soap, then you better install a 3 way ball valve so that soap does not go into the tank when you release the trigger. So in the case of upstreaming you will still be limited on time to pull the trigger. Share this post Link to post Share on other sites
