Paver stripper

[Chazz 14]

I need one that works well, please tell me a good product for stripping pavers and where i can get it. Also do you use a 0 degree rotary tip to strip or will my surface cleaner suffice, or just a close green tip

[Kristopher Pettitt 23]

HEAT!!! is number one. And it depends on how thick it is. If it's too thick then you'll need sandblast it. I say do a test area first because I have found out that some sealers take longer to remove than others. Also keep in mind that if you are removing the sealant from pavers the sand in between each one will come out and when it dries the sand will be on top. You can sweep it back in the cracks. Push broom works best in a back and forth motion. If you're going to seal it your need to sand it anyways before sealing. I would stay away from zero degree tips and turbo nozzle, worst investment buying one of those. Try a 25 first and then maybe go down to 15 if you need to.

As for stripper products I don't know, but hopefully someone else can chime in here.

[Chazz 14]

Thank you

[seymore 90]

I've seen guys talk about using this.....http://www.dadseasyspray.com/contractor-grade

[seymore 90]

There is this product also....http://www.theprosealerstore.com/concrete-sealer-stripper.htm

[Kristopher Pettitt 23]

Your Welcome Chazz.

Shane have you tried any of them?